# 【Zigbee Bridge Pro】Firmware Changelog **URL:** \ **Category:** SONOFF\ **Tags:** sonoff\ **Created:** [November 19, 2024, 9:45am UTC](https://forum.ewelink.cc/t/zigbee-bridge-pro-firmware-changelog/91267 "2024-11-19T09:45:21Z")\ **Posts on this page:** 19\ **Page:** 1
**Author:** ![Leung](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/leung/32/5746_2.png) [@Leung](https://forum.ewelink.cc/u/Leung)\ **Post date:** [November 19, 2024, 9:45am UTC](https://forum.ewelink.cc/t/zigbee-bridge-pro-firmware-changelog/91267/1 "2024-11-19T09:45:21Z")
**3.4.0** **New Features:** - Support TP-WGZBA Thermostat - Support TRV-ZBT Thermostatic Radiator Valve - Support SNZB-09P Siren - Supports 3 additional unreleased devices - Water Valve SWV-ZNU, SWV-ZFU, SWV-ZNE, SWV-ZFE, SWV-ZF2U, SWV-ZF2E supports imperial gallons (gal) **Optimization:** - Fix other bugs and enhance user experience. > **V3.3.0** > > **New Features:** > > - Support Dongle-M\_ZBRouter(Dongle-M Router mode) > - Support for 5 new unreleased devices > > **Optimization:** > > - Fix other bugs and enhance user experience. > **V3.2.0** > > **New Features:** > > - Support SNZB-03PR2 Motion Sensor > - Support SNZB-06P24 Human Presence Sensor > > **Optimization:** > > - Fix the issue of MINI-ZBDIM being erroneously recognized as a switch device. > - Fix other bugs and enhance user experience. > **V3.1.0** > > **New Features:** > > - Support for 3 new unreleased devices > - Optimize the _Remote Temp. & Humi. Display function_ of SNZB-02DR2 > - Optimize S60ZB status reporting > > **Optimization:** > > - Fix other bugs and enhance user experience. > **V3.0.0** > > **New Features:** > > - TRVZB support Adaptive Mode (a feature designed to minimize temperature fluctuations). > > **Optimization:** > > - Fix other bugs and enhance user experience. > **V2.9.0** > > **New Features:** > > - Support setting MINI-ZB2GS & MINI-ZB2GS-L Stepper function. > > **Optimization:** > > - Fix other bugs and enhance user experience. > **V2.8.0** > > **New Features:** > > - Support a new device that have not yet been released. 😉 > - TRVZB support **Temp. Override** , **Boost** , **Display Orientation** feature. And **External Sensor** feature adds support for SNZB-02LD, SNZB-02WD, SNZB-02DR2. > > **Optimization:** > > - Fix other bugs and enhance user experience. > **V2.7.0** > > **New Features:** > > - Support for three new devices that have not yet been released. 😉 > > **Optimization:** > > - Optimize the online/offline message transmission strategy, reduce device offline incidents. > - Fix other bugs and enhance user experience. > **V2.6.0** > > **New Features:** > > - Support remote unlocking of S60ZB after over-threshold protection is triggered. > - Support for new devices that have not yet been released. 😉 > > **Optimization:** > > - Optimize the RSSI reporting logic of sub-devices. > - Fix other bugs and enhance user experience. > **V2.5.0** > > **New Features:** > > > Certain features require app version V5.15.0+ > > - Support setting SNZB-03 _No motion detected for a duration_ as a scene trigger condition. > - Support setting SNZB-06P _No occupancy detected for a duration_ as a scene trigger condition. > - Partial temperature and humidity sensors(SNZB-02P, SNZB-02D) support configuring report thresholds and report Interval to achieve faster reporting, or slower reporting to extend battery life. > - Support ZBMINIR2 network LED indicator. > > **Optimization:** > > - Fix other bugs and enhance user experience. > **V2.4.0** > > - Support daylight saving time. > - Optimized TRV user experience. > **V2.3.0** > > **New Features:** > > - Support adding ZBDongle-P and ZBDongle-E (flash router firmware). > - Support temperature and humidity calibration for SNZB-02D(eWeLink App V5.12). > - Support setting SNZB-03P _No motion detected for a duration_ as a scene trigger condition(eWeLink App V5.13). > - Support WiFi setting(eWeLink App V5.13). > - Support using smart security mode as scene trigger conditions: _smart security mode Armed_, _smart security mode Disarmed_, _smart security mode Armed cancelled_(eWeLink App V5.13). > > **Optimization:** > > - Optimize the online/offline message transmission strategy, reduce device offline incidents. > - Fix other bugs and enhance user experience. > **V2.2.0** > > **New Features:** > > - **SONOFF NEW PRODUCT** 😉 Supports Network indicator control and local scene. > > **Optimization:** > > - Fix the issue of continuous rebooting of sub-device caused by power down during the sub-device OTA process, which may manifest as persistent offline status of the sub-device (low probability). > - Fix the issue where resetting a multi-way switch sub-device during the process of adding it leads to an inability to add it subsequently (low probability). > - Fix other bugs and enhance user experience. > **V2.1.0** > > **New Features:** > > - Support synchronizing Zigbee Smart Water Valve to iHost. > - Support **SONOFF NEW PRODUCT** 😉. > > **Optimization:** > > - Fix the issue of unable to reconnect to WiFi after a period of network disconnection. > - Clear the list of sub-devices when added to a new eWeLink account. > - Fix other bugs and enhance user experience. > **V2.0.0** > > **New Features:** > > - Support Zigbee Smart Water Valve SWV. > - Support Zigbee Smart Switch ZBMINIR2. > > **Optimization:** > > - Automatically mute when switching smart security mode. > - Optimize firmware stability and fix the low-probability crash issue of the gateway in large network scenarios. > - Fix other bugs and enhance user experience. > **V1.9.1** > > **Optimization:** > > - Fix the issue of local temperature and humidity scene failure. > **V1.9.0** > > **New Features:** > > - Add two buzzer sounds: Alarm1 and Alarm2. > - Add an buzzer prompt when disarm/arm the smart security. > - Add Delay Arm feature in the samrt security. > - Add Delay Alarm feature in the samrt security. > - SONOFF TRV supports adjusting valve opening percentage and local scene. > > **Optimization:** > > - Fix other bugs and enhance user experience. > **V1.8.0** > > **New Features:** > > - Support sud-device RSSI > > **Optimization:** > > - Fix WiFi reconnection issues and reduce WiFi offline. ---
**Author:** ![spoustaml](https://avatars.discourse-cdn.com/v4/letter/s/a4c791/32.png) [@spoustaml](https://forum.ewelink.cc/u/spoustaml)\ **Post date:** [January 11, 2025, 2:34pm UTC](https://forum.ewelink.cc/t/zigbee-bridge-pro-firmware-changelog/91267/2 "2025-01-11T14:34:40Z")
Thank you for the information, when can we expect the release of ewelink 5.13? ---
**Author:** ![Leung](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/leung/32/5746_2.png) [@Leung](https://forum.ewelink.cc/u/Leung)\ **Post date:** [January 13, 2025, 10:11am UTC](https://forum.ewelink.cc/t/zigbee-bridge-pro-firmware-changelog/91267/3 "2025-01-13T10:11:39Z")
eWeLink V5.13 for Android has been released on Google Play. Please check for available update, noting that due to a grayscale release, you may receive it a few days later. As for iOS, the release will be around the end of the month, so please stay tuned. Have a good day! 😀 ---
**Author:** ![jonniugr](https://avatars.discourse-cdn.com/v4/letter/j/13edae/32.png) [@jonniugr](https://forum.ewelink.cc/u/jonniugr)\ **Post date:** [January 16, 2025, 6:16am UTC](https://forum.ewelink.cc/t/zigbee-bridge-pro-firmware-changelog/91267/4 "2025-01-16T06:16:39Z")
> [@Leung](#): > > Поддержка настройки SNZB-03P « _Движение не обнаружено в течение определенного времени»_ в качестве условия срабатывания сцены and when will this option appear for other motion sensors and presence sensors??? Why can’t you update all devices at once??? ---
**Author:** ![eaglelady](https://avatars.discourse-cdn.com/v4/letter/e/71c47a/32.png) [@eaglelady](https://forum.ewelink.cc/u/eaglelady)\ **Post date:** [January 16, 2025, 6:32am UTC](https://forum.ewelink.cc/t/zigbee-bridge-pro-firmware-changelog/91267/5 "2025-01-16T06:32:17Z")
This post was flagged by the community and is temporarily hidden. ---
**Author:** ![eaglelady](https://avatars.discourse-cdn.com/v4/letter/e/71c47a/32.png) [@eaglelady](https://forum.ewelink.cc/u/eaglelady)\ **Post date:** [January 17, 2025, 3:50am UTC](https://forum.ewelink.cc/t/zigbee-bridge-pro-firmware-changelog/91267/6 "2025-01-17T03:50:30Z")
If you are using Android, you can now update to version 5.13.0. ---
**Author:** ![jonniugr](https://avatars.discourse-cdn.com/v4/letter/j/13edae/32.png) [@jonniugr](https://forum.ewelink.cc/u/jonniugr)\ **Post date:** [January 17, 2025, 10:01pm UTC](https://forum.ewelink.cc/t/zigbee-bridge-pro-firmware-changelog/91267/7 "2025-01-17T22:01:31Z")
why is your post hidden? i cant read it ---
**Author:** ![ward](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/ward/32/10437_2.png) [@ward](https://forum.ewelink.cc/u/ward)\ **Post date:** [January 20, 2025, 2:42am UTC](https://forum.ewelink.cc/t/zigbee-bridge-pro-firmware-changelog/91267/8 "2025-01-20T02:42:49Z")
That post was mistakenly filtered by the AI spam detector. ---
**Author:** ![jonniugr](https://avatars.discourse-cdn.com/v4/letter/j/13edae/32.png) [@jonniugr](https://forum.ewelink.cc/u/jonniugr)\ **Post date:** [January 20, 2025, 6:14am UTC](https://forum.ewelink.cc/t/zigbee-bridge-pro-firmware-changelog/91267/9 "2025-01-20T06:14:19Z")
There is no function “No motion detected for a certain period of time” as a scene trigger condition in version 5.13.0 for devices such as: SNZB-06P, SNZB-03. ---
**Author:** ![spoustaml](https://avatars.discourse-cdn.com/v4/letter/s/a4c791/32.png) [@spoustaml](https://forum.ewelink.cc/u/spoustaml)\ **Post date:** [February 25, 2025, 6:44pm UTC](https://forum.ewelink.cc/t/zigbee-bridge-pro-firmware-changelog/91267/10 "2025-02-25T18:44:28Z")
Changelog for v2.4.0 please ---
**Author:** ![spoustaml](https://avatars.discourse-cdn.com/v4/letter/s/a4c791/32.png) [@spoustaml](https://forum.ewelink.cc/u/spoustaml)\ **Post date:** [March 2, 2025, 9:19pm UTC](https://forum.ewelink.cc/t/zigbee-bridge-pro-firmware-changelog/91267/11 "2025-03-02T21:19:54Z")
What’s new in version 2.4.0? ---
**Author:** ![jonniugr](https://avatars.discourse-cdn.com/v4/letter/j/13edae/32.png) [@jonniugr](https://forum.ewelink.cc/u/jonniugr)\ **Post date:** [March 3, 2025, 11:42am UTC](https://forum.ewelink.cc/t/zigbee-bridge-pro-firmware-changelog/91267/12 "2025-03-03T11:42:53Z")
![IMG_20250303_134030](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/b/b3a7386406bd172d66ccc33ac8d3a47ac4e7451e.jpeg) ---
**Author:** ![erich.scheilko](https://avatars.discourse-cdn.com/v4/letter/e/49beb7/32.png) [@erich.scheilko](https://forum.ewelink.cc/u/erich.scheilko)\ **Post date:** [April 3, 2025, 5:38am UTC](https://forum.ewelink.cc/t/zigbee-bridge-pro-firmware-changelog/91267/13 "2025-04-03T05:38:09Z")
Changelog for v2.5.0 please ---
**Author:** ![Leung](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/leung/32/5746_2.png) [@Leung](https://forum.ewelink.cc/u/Leung)\ **Post date:** [April 9, 2025, 3:01am UTC](https://forum.ewelink.cc/t/zigbee-bridge-pro-firmware-changelog/91267/14 "2025-04-09T03:01:28Z")
😀We’ve updated the Changelog for v2.4.0 and v2.5.0. ---
**Author:** ![erich.scheilko](https://avatars.discourse-cdn.com/v4/letter/e/49beb7/32.png) [@erich.scheilko](https://forum.ewelink.cc/u/erich.scheilko)\ **Post date:** [July 20, 2025, 7:25am UTC](https://forum.ewelink.cc/t/zigbee-bridge-pro-firmware-changelog/91267/15 "2025-07-20T07:25:00Z")
Changelog for v2.6.0 please ---
**Author:** ![ewelink.troubling822](https://avatars.discourse-cdn.com/v4/letter/e/e9c0ed/32.png) [@ewelink.troubling822](https://forum.ewelink.cc/u/ewelink.troubling822)\ **Post date:** [July 31, 2025, 11:32am UTC](https://forum.ewelink.cc/t/zigbee-bridge-pro-firmware-changelog/91267/16 "2025-07-31T11:32:15Z")
Hello, I’m considering to buy **SNZB-06P** to connect with a ZBbrdge-U. The feature “ **No occupancy detected for a duration”** means that I will be able to set conditions like “If no occupancy is detected for 1h turn off the lights” and “if no presence is detected for 3 hours change the valve settings to 16C”? I’m sorry if the question looks stupid but I don’t want to buy something that will not be useful for me and I installed ewelink for the first time today. Many thanks ---
**Author:** ![Leung](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/leung/32/5746_2.png) [@Leung](https://forum.ewelink.cc/u/Leung)\ **Post date:** [August 1, 2025, 7:51am UTC](https://forum.ewelink.cc/t/zigbee-bridge-pro-firmware-changelog/91267/17 "2025-08-01T07:51:18Z")
Yes, you can set multiple scenes to perform different actions at different times after No occupancy detected.😀 > [@ewelink.troubling822](#): > > Hello, I’m considering to buy **SNZB-06P** to connect with a ZBbrdge-U. > The feature “ **No occupancy detected for a duration”** means that I will be able to set conditions like “If no occupancy is detected for 1h turn off the lights” and “if no presence is detected for 3 hours change the valve settings to 16C”? > I’m sorry if the question looks stupid but I don’t want to buy something that will not be useful for me and I installed ewelink for the first time today. > Many thanks ---
**Author:** ![spoustaml](https://avatars.discourse-cdn.com/v4/letter/s/a4c791/32.png) [@spoustaml](https://forum.ewelink.cc/u/spoustaml)\ **Post date:** [September 17, 2026, 1:29pm UTC](https://forum.ewelink.cc/t/zigbee-bridge-pro-firmware-changelog/91267/18 "2026-09-17T13:29:01Z")
Hello, since the last update, it has not been possible to update the devices; three different ZigBee devices are reporting an update failure. ---
**Author:** ![Leung](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/leung/32/5746_2.png) [@Leung](https://forum.ewelink.cc/u/Leung)\ **Post date:** [September 20, 2026, 3:08am UTC](https://forum.ewelink.cc/t/zigbee-bridge-pro-firmware-changelog/91267/19 "2026-09-20T03:08:24Z")
Hi, thanks for your feedback! I’ve sent you a private message.