# Tuya Matter Hub connected to iHost - Zigbee devices not visible

**URL:** https://forum.ewelink.cc/t/tuya-matter-hub-connected-to-ihost-zigbee-devices-not-visible/152530
**Category:** eWeLink CUBE
**Created:** [March 22, 2025, 9:20am UTC](https://forum.ewelink.cc/t/tuya-matter-hub-connected-to-ihost-zigbee-devices-not-visible/152530 "2025-03-22T09:20:36Z")
**Posts on this page:** 12
**Page:** 1

<div class="post-metadata">

### Author: ![devishian](https://avatars.discourse-cdn.com/v4/letter/d/ec9cab/32.png) [@devishian](https://forum.ewelink.cc/u/devishian)
#### Post date: [March 22, 2025, 9:20am UTC](https://forum.ewelink.cc/t/tuya-matter-hub-connected-to-ihost-zigbee-devices-not-visible/152530/1 "2025-03-22T09:20:36Z")

</div>

Dear community,

I am currently integrating a Tuya Matter Hub with the iHost platform. The Matter hub is successfully recognized and added by iHost without any issues.

However, I am facing a specific problem: while the Tuya Matter Hub itself appears correctly in iHost, none of the Zigbee devices connected to it (such as sensors, switches, etc.) are visible within the iHost interface. The Zigbee devices are properly paired with the Tuya Matter Hub and function correctly within the Tuya ecosystem, but they are not exposed or controllable through iHost.

I would appreciate any clarification on the following points:

1. Is this behavior expected under the current firmware and Matter protocol implementation?
2. Does iHost currently support child device discovery from third-party Matter bridges such as Tuya’s?
3. Are there any configuration steps or firmware updates required in order to make Zigbee sub-devices accessible via iHost?

Thank you in advance for your support.

---

<div class="post-metadata">

### Author: ![Tamer\_Salah](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/tamer_salah/32/4047_2.png) [@Tamer\_Salah](https://forum.ewelink.cc/u/Tamer_Salah)
#### Post date: [March 22, 2025, 9:23am UTC](https://forum.ewelink.cc/t/tuya-matter-hub-connected-to-ihost-zigbee-devices-not-visible/152530/2 "2025-03-22T09:23:19Z")

</div>

check this link regarding which types currently supported

> [@eWeLink CUBE Matter Hub Compatibility](https://forum.ewelink.cc/t/ewelink-cube-matter-hub-compatibility/78282):
>
> Matter Hub lets you easily add, control, and manage Matter-enabled devices locally using the eWeLink CUBE. Currently, in beta, we support: Matter plugs and on/off switches that work with the [On/Off Plug in Unit]([Supported Device Types - Matter](https://handbook.buildwithmatter.com/howitworks/devicetypes/#onoff-light-switch)) device type. And we will keep expanding the list to cover more devices. Matter Lights, including On/Off Light Dimmable Light Temperature Light Extended Color Light. Please kindly note, that Matter device manufacturers may use different standards. …

---

<div class="post-metadata">

### Author: ![devishian](https://avatars.discourse-cdn.com/v4/letter/d/ec9cab/32.png) [@devishian](https://forum.ewelink.cc/u/devishian)
#### Post date: [March 22, 2025, 9:27am UTC](https://forum.ewelink.cc/t/tuya-matter-hub-connected-to-ihost-zigbee-devices-not-visible/152530/3 "2025-03-22T09:27:54Z")

</div>

To test it i connected sonoff zigbee 3.0 temperature and humidity sensor to tuya matter hub. It is correctly seen but it doesn’t show under iHost.

---

<div class="post-metadata">

### Author: ![Tamer\_Salah](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/tamer_salah/32/4047_2.png) [@Tamer\_Salah](https://forum.ewelink.cc/u/Tamer_Salah)
#### Post date: [March 22, 2025, 9:29am UTC](https://forum.ewelink.cc/t/tuya-matter-hub-connected-to-ihost-zigbee-devices-not-visible/152530/4 "2025-03-22T09:29:25Z")

</div>

as the list above currently matter plugs and lights via matterbridge supported for now

---

<div class="post-metadata">

### Author: ![devishian](https://avatars.discourse-cdn.com/v4/letter/d/ec9cab/32.png) [@devishian](https://forum.ewelink.cc/u/devishian)
#### Post date: [March 22, 2025, 4:37pm UTC](https://forum.ewelink.cc/t/tuya-matter-hub-connected-to-ihost-zigbee-devices-not-visible/152530/5 "2025-03-22T16:37:56Z")

</div>

So basically only lights, plugs and switches… and no improvements in six months. A little basic…

---

<div class="post-metadata">

### Author: ![ociepa.ekotox](https://avatars.discourse-cdn.com/v4/letter/o/c68b51/32.png) [@ociepa.ekotox](https://forum.ewelink.cc/u/ociepa.ekotox)
#### Post date: [March 23, 2025, 4:18pm UTC](https://forum.ewelink.cc/t/tuya-matter-hub-connected-to-ihost-zigbee-devices-not-visible/152530/7 "2025-03-23T16:18:21Z")

</div>

> [@devishian](#):
>
> I am currently integrating a Tuya Matter Hub with the iHost platform. The Matter hub is successfully recognized and added by iHost without any issues.
> 
> However, I am facing a specific problem: while the Tuya Matter Hub itself appears correctly in iHost, none of the Zigbee devices connected to it (such as sensors, switches, etc.) are visible within the iHost interface.

Zigbee devices added to Tuya Matter Hub will not be visible in IHOST. Tuya Matter Hub does not act as a matter bridge.

On the other hand, IHOST as a matter Hub does not yet allow you to add a device such as a matter bridge.

---

<div class="post-metadata">

### Author: ![Tamer\_Salah](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/tamer_salah/32/4047_2.png) [@Tamer\_Salah](https://forum.ewelink.cc/u/Tamer_Salah)
#### Post date: [March 23, 2025, 11:45pm UTC](https://forum.ewelink.cc/t/tuya-matter-hub-connected-to-ihost-zigbee-devices-not-visible/152530/8 "2025-03-23T23:45:44Z")

</div>

sorry @ociepa.ekotox , i just want to clarify few points , i got zemismart hub which you can call it a tuya matter hub and it acts like a matterbridge , also ihost support adding other matterbridges such as zemismart but with few limited types as of now lights , switches and plugs with on/off function

 ![Screenshot 2025-03-24 025911](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/d/d129eafcf0ab8e856be444f24f8ef6682f91eb1a.png)  
 ![Screenshot 2025-03-24 025852](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/a/a95dba51327812ad4fc440b15ec43164b3179aac.png)  
 ![Screenshot 2025-03-24 025823](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/7/7cfff9c66258548b2a948248c26faa9d81804c92.png)

---

<div class="post-metadata">

### Author: ![ociepa.ekotox](https://avatars.discourse-cdn.com/v4/letter/o/c68b51/32.png) [@ociepa.ekotox](https://forum.ewelink.cc/u/ociepa.ekotox)
#### Post date: [March 24, 2025, 12:01am UTC](https://forum.ewelink.cc/t/tuya-matter-hub-connected-to-ihost-zigbee-devices-not-visible/152530/9 "2025-03-24T00:01:56Z")

</div>

Unless so. I don’t have any matter bridge other than ihost to check.

I know for a fact that you can’t add a second ihost to an ihost as a matter bridge.

 ![IHOST MATTER BRIDGE_IHOST_2.5.0](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/0/0a0e7ede7b79d69d9b298b5cc36d020490f9790d.jpeg)

I haven’t checked in CubeOs yet.

---

<div class="post-metadata">

### Author: ![Tamer\_Salah](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/tamer_salah/32/4047_2.png) [@Tamer\_Salah](https://forum.ewelink.cc/u/Tamer_Salah)
#### Post date: [March 24, 2025, 12:07am UTC](https://forum.ewelink.cc/t/tuya-matter-hub-connected-to-ihost-zigbee-devices-not-visible/152530/10 "2025-03-24T00:07:29Z")

</div>

it can be , i test sharing from ihost to cubeos and it was fine with supported types .

 ![Screenshot 2025-03-24 030807](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/e/e2fc4d173531d16c425dcb38db682a2f6f14b2bf.png)  
 ![Screenshot 2025-03-24 030752](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/9/95e0f6661d7d49dc7491e10ff72e1fdbf244cd20.png)

---

<div class="post-metadata">

### Author: ![Tamer\_Salah](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/tamer_salah/32/4047_2.png) [@Tamer\_Salah](https://forum.ewelink.cc/u/Tamer_Salah)
#### Post date: [March 24, 2025, 12:18am UTC](https://forum.ewelink.cc/t/tuya-matter-hub-connected-to-ihost-zigbee-devices-not-visible/152530/11 "2025-03-24T00:18:08Z")

</div>

![Screenshot 2025-03-24 032008](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/a/a10a867e99a5733bd043a99b6cd260b3b1b4de0f.png)

---

<div class="post-metadata">

### Author: ![Tamer\_Salah](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/tamer_salah/32/4047_2.png) [@Tamer\_Salah](https://forum.ewelink.cc/u/Tamer_Salah)
#### Post date: [March 24, 2025, 12:49am UTC](https://forum.ewelink.cc/t/tuya-matter-hub-connected-to-ihost-zigbee-devices-not-visible/152530/12 "2025-03-24T00:49:39Z")

</div>

interesting how both devices from sonoff and cant pair to each other 😆

---

<div class="post-metadata">

### Author: ![system](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/1X/6e8b86e61f442be5e018dc23b7f5019a98bfad64.png) [@system](https://forum.ewelink.cc/u/system)
#### Post date: [March 24, 2025, 12:49pm UTC](https://forum.ewelink.cc/t/tuya-matter-hub-connected-to-ihost-zigbee-devices-not-visible/152530/13 "2025-03-24T12:49:51Z")

</div>

This topic was automatically closed 12 hours after the last reply. New replies are no longer allowed.
