# TRVZB go to boost mode and max temp

**URL:** <https://forum.ewelink.cc/t/trvzb-go-to-boost-mode-and-max-temp/209415>\
**Category:** NSPanel Pro\
**Created:** [October 14, 2026, 6:12am UTC](https://forum.ewelink.cc/t/trvzb-go-to-boost-mode-and-max-temp/209415 "2026-10-14T06:12:54Z")\
**Posts on this page:** 3\
**Page:** 2

<div class="post-metadata">

**Author:** ![Milk](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/milk/32/8679_2.png) [@Milk](https://forum.ewelink.cc/u/Milk)\
**Post date:** [October 20, 2026, 7:53am UTC](https://forum.ewelink.cc/t/trvzb-go-to-boost-mode-and-max-temp/209415/21 "2026-10-20T07:53:45Z")

</div>

@vpolizzi @edgardasb Hi, regarding the issue where the TRV appears to enter **Boost mode automatically** , we’ve identified the cause.

This is an issue on the TRV side. The device periodically reports a Boost status, and NSPanel Pro simply displays the status reported by the TRV.

We’ve already reported this issue to the relevant team, and for now we’ll need to wait for a TRV firmware update to address it.

Please note that this is only a **display issue**. The TRV does not actually enter Boost heating mode, so there’s no need to worry about unnecessary energy consumption.

---

<div class="post-metadata">

**Author:** ![ttraxx](https://avatars.discourse-cdn.com/v4/letter/t/dc4da7/32.png) [@ttraxx](https://forum.ewelink.cc/u/ttraxx)\
**Post date:** [October 22, 2026, 5:59pm UTC](https://forum.ewelink.cc/t/trvzb-go-to-boost-mode-and-max-temp/209415/22 "2026-10-22T17:59:49Z")

</div>

I have same problem…

---

<div class="post-metadata">

**Author:** ![vpolizzi](https://avatars.discourse-cdn.com/v4/letter/v/e36b37/32.png) [@vpolizzi](https://forum.ewelink.cc/u/vpolizzi)\
**Post date:** [October 28, 2026, 4:06pm UTC](https://forum.ewelink.cc/t/trvzb-go-to-boost-mode-and-max-temp/209415/23 "2026-10-28T16:06:54Z")

</div>

Hello @Milk is there any update for the fix?

[Previous page](https://forum.ewelink.cc/t/trvzb-go-to-boost-mode-and-max-temp/209415.md?page=1)