# Sonoff T5EU3C (TX Ultimate) motor (Blinds and Curtains mode)

**URL:** <https://forum.ewelink.cc/t/sonoff-t5eu3c-tx-ultimate-motor-blinds-and-curtains-mode/29962>\
**Category:** Uncategorized\
**Created:** [March 27, 2024, 12:23pm UTC](https://forum.ewelink.cc/t/sonoff-t5eu3c-tx-ultimate-motor-blinds-and-curtains-mode/29962 "2024-03-27T12:23:54Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![michail.pittas](https://avatars.discourse-cdn.com/v4/letter/m/b3f665/32.png) [@michail.pittas](https://forum.ewelink.cc/u/michail.pittas)\
**Post date:** [March 27, 2024, 12:23pm UTC](https://forum.ewelink.cc/t/sonoff-t5eu3c-tx-ultimate-motor-blinds-and-curtains-mode/29962/1 "2024-03-27T12:23:54Z")

</div>

Good morning hoping all is well

My problem is that subject purchased Sonoff wall switch device (T5-3C-86, version 1.3.1) and configured in eWelink for a blinds motor mode (open-pause -close). Unfortunately cannot be recognized in Alexa and also in Google home as blinds control device and no voice commands are applicable, but only as a on-off switch or lights buttons functions.

Standing by for your kind support.

---

<div class="post-metadata">

**Author:** ![gourie](https://avatars.discourse-cdn.com/v4/letter/g/35a633/32.png) [@gourie](https://forum.ewelink.cc/u/gourie)\
**Post date:** [January 3, 2025, 2:51pm UTC](https://forum.ewelink.cc/t/sonoff-t5eu3c-tx-ultimate-motor-blinds-and-curtains-mode/29962/2 "2025-01-03T14:51:34Z")

</div>

Hello!

Have you found a solution? You have to change the mode in the settings and change it to “motor mode” (I don’t know the exact word, cuz I am using ewelink with German).

And then you can calibrate the curtain.

Best regards