# SONOFF iHost automation **URL:** \ **Category:** eWeLink CUBE\ **Created:** [March 28, 2023, 3:06am UTC](https://forum.ewelink.cc/t/sonoff-ihost-automation/15800 "2023-03-28T03:06:03Z")\ **Posts on this page:** 14\ **Page:** 2
**Author:** ![eerke](https://avatars.discourse-cdn.com/v4/letter/e/eb9ed0/32.png) [@eerke](https://forum.ewelink.cc/u/eerke)\ **Post date:** [October 31, 2023, 8:08pm UTC](https://forum.ewelink.cc/t/sonoff-ihost-automation/15800/21 "2023-10-31T20:08:44Z")
I sorted this by going for a smaller and crapper SD card. Slower. Unbranded. Made no sense as I put in a good card to start with. I thought by now they had sorted this. The other thing is that they have updated the USB port ability, but I don’t know what is possible now. It might be possible to use a flash disk or SSD now. I would like to know myself as I’ve previously had a SD card in a Raspberry Pi die, so I don’t entirely trust them. ---
**Author:** ![jcquintela](https://avatars.discourse-cdn.com/v4/letter/j/8e7dd6/32.png) [@jcquintela](https://forum.ewelink.cc/u/jcquintela)\ **Post date:** [December 1, 2023, 4:53pm UTC](https://forum.ewelink.cc/t/sonoff-ihost-automation/15800/22 "2023-12-01T16:53:10Z")
Same Issue here. Devices like NSPanel, MiniR4 and Smart Socket, which have LAN control, do not work on iHost. Sometimes they are detected with offline status. These same devices works normally on Ewelink APP. ---
**Author:** ![jcquintela](https://avatars.discourse-cdn.com/v4/letter/j/8e7dd6/32.png) [@jcquintela](https://forum.ewelink.cc/u/jcquintela)\ **Post date:** [December 1, 2023, 5:05pm UTC](https://forum.ewelink.cc/t/sonoff-ihost-automation/15800/23 "2023-12-01T17:05:36Z")
My three DW2 devices are not available on the Node-RED, nor directly on iHost. These works normally through scenes created in Ewelink APP ---
**Author:** ![Daniel\_Zhan](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/daniel_zhan/32/622_2.png) [@Daniel\_Zhan](https://forum.ewelink.cc/u/Daniel_Zhan)\ **Post date:** [December 6, 2023, 7:39am UTC](https://forum.ewelink.cc/t/sonoff-ihost-automation/15800/24 "2023-12-06T07:39:41Z")
Did you update the iHost firmware to the latest 1.12.0? Please update and try again. ---
**Author:** ![jcquintela](https://avatars.discourse-cdn.com/v4/letter/j/8e7dd6/32.png) [@jcquintela](https://forum.ewelink.cc/u/jcquintela)\ **Post date:** [December 6, 2023, 11:50am UTC](https://forum.ewelink.cc/t/sonoff-ihost-automation/15800/25 "2023-12-06T11:50:10Z")
Yes, I updated and tested, but the issue persists. ![Screenshot_20231206-085530~2](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/0/0cbb3a0323c2432e27f3d147126d66181a504a8c.png) ---
**Author:** ![tmalex](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/tmalex/32/2966_2.png) [@tmalex](https://forum.ewelink.cc/u/tmalex)\ **Post date:** [December 6, 2023, 1:02pm UTC](https://forum.ewelink.cc/t/sonoff-ihost-automation/15800/26 "2023-12-06T13:02:38Z")
> [@jcquintela](#): > > DW2 DW2 it’s not compatible with iHost… and I think it will not be soon… The model name is DW2-WiFI-L. At light bulbs, the models with L have lan control, DW2 have an L in name but no LAN control… I have some DW2 too but I’ve replaced them with SNZB-04, same sensor but with zigbee… ---
**Author:** ![songal](https://avatars.discourse-cdn.com/v4/letter/s/c67d28/32.png) [@songal](https://forum.ewelink.cc/u/songal)\ **Post date:** [December 6, 2023, 3:36pm UTC](https://forum.ewelink.cc/t/sonoff-ihost-automation/15800/27 "2023-12-06T15:36:35Z")
I checked that DW2 should be supported in a release by the end of this month (December). ---
**Author:** ![morgan](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/morgan/32/3184_2.png) [@morgan](https://forum.ewelink.cc/u/morgan)\ **Post date:** [December 6, 2023, 10:07pm UTC](https://forum.ewelink.cc/t/sonoff-ihost-automation/15800/28 "2023-12-06T22:07:16Z")
> [@songal](#): > > I checked that DW2 should be supported in a release by the end of this month (December). DW2-WiFI-L or DW2-WiFI? ---
**Author:** ![Daniel\_Zhan](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/daniel_zhan/32/622_2.png) [@Daniel\_Zhan](https://forum.ewelink.cc/u/Daniel_Zhan)\ **Post date:** [December 7, 2023, 3:11am UTC](https://forum.ewelink.cc/t/sonoff-ihost-automation/15800/29 "2023-12-07T03:11:11Z")
How about the eWeLink Smart Home addon version? The latest one is 1.4.0. ![image](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/e/ef36fcab85e02be4593fc6ec867ebf88f456b56c.png) ---
**Author:** ![songal](https://avatars.discourse-cdn.com/v4/letter/s/c67d28/32.png) [@songal](https://forum.ewelink.cc/u/songal)\ **Post date:** [December 8, 2023, 9:21am UTC](https://forum.ewelink.cc/t/sonoff-ihost-automation/15800/30 "2023-12-08T09:21:09Z")
All of them. ---
**Author:** ![jonathan.parisi](https://avatars.discourse-cdn.com/v4/letter/j/a88e57/32.png) [@jonathan.parisi](https://forum.ewelink.cc/u/jonathan.parisi)\ **Post date:** [December 10, 2023, 3:02pm UTC](https://forum.ewelink.cc/t/sonoff-ihost-automation/15800/31 "2023-12-10T15:02:56Z")
I have the same problem. Sonoff Basic R2 with LAN control doesn’t appear. It’s in the same LAN network and all devices are on the latest software. It makes no sense ☹ ---
**Author:** ![designerferro](https://avatars.discourse-cdn.com/v4/letter/d/898d66/32.png) [@designerferro](https://forum.ewelink.cc/u/designerferro)\ **Post date:** [April 21, 2024, 4:57pm UTC](https://forum.ewelink.cc/t/sonoff-ihost-automation/15800/32 "2024-04-21T16:57:26Z")
I also have DW2-Wi-Fi-L and the eWeLink app doesn’t show me the button to turno on lan mode. I have a mini R1, but in its interface it shows lan mode. ---
**Author:** ![2kohms](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/2kohms/32/4845_2.png) [@2kohms](https://forum.ewelink.cc/u/2kohms)\ **Post date:** [May 24, 2024, 5:07am UTC](https://forum.ewelink.cc/t/sonoff-ihost-automation/15800/33 "2024-05-24T05:07:30Z")
Keep me posted, I am eager to learn what I don’t know. I have a iHost too, trying to learn docker’s Node-red and hopefully learn some JavaScript at the same time. So far, I am too confused with the product. I’ve been watching too many news groups hoping to fix my automation issues. ---
**Author:** ![sergeyfima](https://avatars.discourse-cdn.com/v4/letter/s/b5a626/32.png) [@sergeyfima](https://forum.ewelink.cc/u/sergeyfima)\ **Post date:** [September 30, 2024, 8:44am UTC](https://forum.ewelink.cc/t/sonoff-ihost-automation/15800/34 "2024-09-30T08:44:12Z")
Приветствую. Скажите пожалуйста, это устройство работает из коробки или надо что то еще устанавливать? [Previous page](https://forum.ewelink.cc/t/sonoff-ihost-automation/15800.md?page=1)