# Show the signal strength for Zigbee devices

**URL:** <https://forum.ewelink.cc/t/show-the-signal-strength-for-zigbee-devices/9777>\
**Category:** Ideas & Suggestion\
**Tags:** zigbee, nspanel\
**Created:** [December 6, 2022, 1:31pm UTC](https://forum.ewelink.cc/t/show-the-signal-strength-for-zigbee-devices/9777 "2022-12-06T13:31:30Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![renatoyamane](https://avatars.discourse-cdn.com/v4/letter/r/e95f7d/32.png) [@renatoyamane](https://forum.ewelink.cc/u/renatoyamane)\
**Post date:** [December 6, 2022, 1:31pm UTC](https://forum.ewelink.cc/t/show-the-signal-strength-for-zigbee-devices/9777/1 "2022-12-06T13:31:30Z")

</div>

Gateway: Sonoff NSPanel PRO

It will be useful to see the signal strength for each device connected, to have a better idea about how to distribute the Zigbee routers.

Wi-Fi icon has 4 bars where we can see the signal strength.  
It would be nice to have the same feature also for Zigbee devices.  
The Zigbee icon could have 4 different colors to identify the signal strength: green, yellow, orange and red.

Best regards,  
Renato

---

<div class="post-metadata">

**Author:** ![yitie](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/yitie/32/3613_2.png) [@yitie](https://forum.ewelink.cc/u/yitie)\
**Post date:** [December 9, 2022, 9:03am UTC](https://forum.ewelink.cc/t/show-the-signal-strength-for-zigbee-devices/9777/2 "2022-12-09T09:03:58Z")

</div>

Thanks for the idea, forwarded this to hardware time for further research.

---

<div class="post-metadata">

**Author:** ![Undeene](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/undeene/32/878_2.png) [@Undeene](https://forum.ewelink.cc/u/Undeene)\
**Post date:** [December 9, 2022, 9:15am UTC](https://forum.ewelink.cc/t/show-the-signal-strength-for-zigbee-devices/9777/3 "2022-12-09T09:15:01Z")

</div>

That would be great to have on all bridge devices, not just NSPanel.  
I also have some issues with one of my sensors, probably due to weak signal (keeps going offline from time to time), but I’m not sure since I can’t see signal strength. Signal goes through 3 walls with 5 meters distance.

---

<div class="post-metadata">

**Author:** ![renatoyamane](https://avatars.discourse-cdn.com/v4/letter/r/e95f7d/32.png) [@renatoyamane](https://forum.ewelink.cc/u/renatoyamane)\
**Post date:** [September 14, 2023, 9:25am UTC](https://forum.ewelink.cc/t/show-the-signal-strength-for-zigbee-devices/9777/4 "2023-09-14T09:25:16Z")

</div>

Hi @yitie

What does this feature mean?

_Open the NSPanel Pro on eWeLink app → click on 3 dots on the right top corner → Pilot Features → Turbo Mode (Enhance Zigbee signal by maximizing the transmit power of NSPanel Prozigbee module)_

Is it safe to keep it always ON or it’s a kind of “overclock” that can damage the module in a long term?