# 【Release Note】 Bridge-U | Zigbee Bridge Ultra Stable v2.8.0 Update

**URL:** <https://forum.ewelink.cc/t/release-note-bridge-u-zigbee-bridge-ultra-stable-v2-8-0-update/209412>\
**Category:** Bridge Series\
**Created:** [October 14, 2026, 3:31am UTC](https://forum.ewelink.cc/t/release-note-bridge-u-zigbee-bridge-ultra-stable-v2-8-0-update/209412 "2026-10-14T03:31:57Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![KwayLi99](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/kwayli99/32/7691_2.png) [@KwayLi99](https://forum.ewelink.cc/u/KwayLi99)\
**Post date:** [October 14, 2026, 3:31am UTC](https://forum.ewelink.cc/t/release-note-bridge-u-zigbee-bridge-ultra-stable-v2-8-0-update/209412/1 "2026-10-14T03:31:57Z")

</div>

![BF3FF3BD-BE32-4e1a-9663-5424B41BD6DA](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/0/0a9201e07fcad7e0192463f2db9f7962752b4e06.png)

**📘[【Release Note】 Zigbee Bridge Ultra Stable Version History](https://forum.ewelink.cc/t/release-note-zigbee-bridge-ultra-version-history/47897/75)**

* * *

## v2.8.0（2026/10/13)

**New Features:**

- Added support for the following Zigbee devices:
  - SONOFF SNZT-04P Zigbee door/window sensor
  - SONOFF SNZT-03P Zigbee motion sensor
  - SONOFF ZBM5-1C-86/120 Zigbee smart wall switch
  - SONOFF ZBM5-2C-86/120 Zigbee smart wall switch
  - SONOFF ZBM5-3C-86/120 Zigbee smart wall switch

- Added five selectable alarm sounds configurable for the SONOFF SNZB-09P indoor siren.

#### **Optimizations**

- Improved the process for entering pairing mode and performing a factory reset on the SONOFF SNZB-02B.
- SONOFF SNZB-02DR2 can now use two external sensors, with temperature and humidity readings from both shown on its display and in the eWeLink App.
- Turbo Mode is now available in the Local Web Portal to maximize the Zigbee module’s transmit power and help improve signal strength.
- Added support for the Tuya T2-Z62 smart fan switch, with supported controls exposed to Matter-enabled platforms via Matter Bridge.

#### **Bug Fixes:**

- Resolved an issue preventing a SONOFF TR-WGZBA thermostat panel from working with two SONOFF TRV-ZBT thermostatic radiator valves at the same time.
- Fixed an issue where the SONOFF TR-WGZBA could incorrectly display 0°C when linked to a SONOFF SNZB-02DR2.
- Fixed an issue where the operating mode and target temperature for the Atlantic Group Interface Naviclim (GW003-AS-IN-TE-FC) were not displayed in the eWeLink App.
- Fixed an issue where the alarm status of the SONOFF SNZB-09P could fail to sync after the bridge recovered from a power outage, leaving the alarm controls in the eWeLink App unresponsive.
- Fixed an issue where sub-devices could disappear or lose their names in the eWeLink App after an offline ZBBridge-U was deleted and re-added to the same account.
- Fixed an issue where the thermostat mode and operating status of the MOES BHT-002 were not displayed in the eWeLink App.

* * *

---

<div class="post-metadata">

**Author:** ![KwayLi99](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/kwayli99/32/7691_2.png) [@KwayLi99](https://forum.ewelink.cc/u/KwayLi99)\
**Post date:** [October 14, 2026, 3:32am UTC](https://forum.ewelink.cc/t/release-note-bridge-u-zigbee-bridge-ultra-stable-v2-8-0-update/209412/2 "2026-10-14T03:32:09Z")

</div>