# 【Release Note】 Bridge-U | Zigbee Bridge Ultra Beta Version Update **URL:** \ **Category:** Bridge Series\ **Tags:** scene, zigbee, sonoff\ **Created:** [June 23, 2026, 6:43am UTC](https://forum.ewelink.cc/t/release-note-bridge-u-zigbee-bridge-ultra-beta-version-update/208641 "2026-06-23T06:43:15Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![KwayLi99](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/kwayli99/32/7691_2.png) [@KwayLi99](https://forum.ewelink.cc/u/KwayLi99)\ **Post date:** [June 23, 2026, 6:43am UTC](https://forum.ewelink.cc/t/release-note-bridge-u-zigbee-bridge-ultra-beta-version-update/208641/1 "2026-06-23T06:43:15Z")
![BF3FF3BD-BE32-4e1a-9663-5424B41BD6DA](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/0/0a9201e07fcad7e0192463f2db9f7962752b4e06.png) * * * ## **Beta Version 3.9.0 (2026/09/10)** **Expanded Device Compatibility:** - Added support for SONOFF TP-WGZBA Zigbee/ Bluetooth dual-mode thermostat panel. **Matter Bridge Updates:** - Added support for syncing the following Matter-supported device types to Matter-enabled platforms via Matter Bridge: - Dimmable Plug-in Unit - Pressure Sensor - Added support for exposing additional Air Quality Sensor measurements via Matter Bridge: - Formaldehyde concentration - Nitrogen dioxide concentration - Ozone concentration - PM1 concentration - PM10 concentration - Radon concentration - Expanded **Boolean State Configuration** cluster support for: - Occupancy Sensors now support sensitivity adjustment. - Water Leak Detectors now support enabling or disabling tamper alerts. **Optimizations:** - Changed Matter Bridge mapping for multi-function devices to use multiple endpoints instead of compose, improving device compatibility. - SONOFF BASIC-ZB1GSP now supports bidirectional energy monitoring, with exported energy data available in history graphs. - SONOFF SNZB-02UL can now use SNZB-02D, SNZB-02P, SNZB-02WD, SNZB-02LD, SNZB-02DR2, SNZB-02B, SNZB-02M, and other SNZB-02UL devices as external sensors, providing more accurate room temperature measurements. - The Ethernet MAC address is now available in the Local Web Portal. - SONOFF SNZB-03PR2 can now be used as a Smart Security alarm trigger. - Automations now run immediately after creation or editing if their sub-device trigger conditions are already met. - Updated BTHome device mappings over MQTT to represent supported capabilities more accurately. - Optimized status cache handling for third-party sirens that do not automatically report status data. **Bug Fixes:** - Fixed an issue where ZBBridge-U could continue beeping when delayed arming was enabled with more than three sub-devices. - Fixed an issue where Zigbee device syncing to Home Assistant could fail after MQTT recovered from an initial connection failure. - Fixed an issue where SONOFF SNZB-09P was shown as “Unsupported” and could not be exposed to Matter-enabled platforms via Matter Bridge. * * * > **v3.7.0 what's new** > > ## **Beta Version 3.7.0 (2026/08/10)** > > **New Features:** > > - **Local Web Portal Enhancements** > - Added access to the Zigbee2MQTT web interface for monitoring Zigbee devices, adjusting parameters, and accessing advanced settings. > - Added support for the following Zigbee device types: > - Siren > - Water Valve > - Flow Sensor > - Rain Sensor > - Soil Sensor > - Air Purifier > > - Expanded the range of Zigbee device types that can be synced to Matter-enabled platforms via Matter Bridge: > - Siren > - Flow Sensor > - Rain Sensor > - Soil Sensor > - Air Purifier > > - **Matter Bridge Update:** eWeLink-linked cameras on the same local network as ZBBridge-U can now be bridged to Matter-enabled platforms for live video viewing. > - **Expanded Device Compatibility** > Added support for the following Zigbee devices: > - SONOFF S61SZBTPB US-type Zigbee smart plug > - SONOFF MINI-ZB1GS single-channel Zigbee smart switch > > - **Bridge Firmware Recovery Authentication:** Access now requires the Local Web Portal password. > > **Optimizations:** > > - SONOFF SNZB-02UL can now serve as an external sensor for SONOFF SNZB-02DR2 or SONOFF TRVZB, providing more accurate room temperature measurements. > > **Bug Fixes:** > > - Fixed an issue that prevented the following SONOFF Zigbee/Bluetooth dual-mode devices from being added through the Local Web Portal when no eWeLink account was linked: > - Smart Water Valves: SWV-ZNU / SWV-ZNE / SWV-ZF2U / SWV-ZF2E > - Thermostatic Radiator Valve: TRV-ZBT > - Smart Switches: MINI-ZB1GS / MINI-ZB1GSP > - Power Meter: MINI-ZB1GP > > - Fixed an issue where Bridge Firmware Recovery could incorrectly report that the Zigbee module had failed to start. > - Fixed an issue where some channels were missing from the Zigbee channel list. > - Fixed an issue that could cause OTA updates for SONOFF MINI-ZB1GSP to fail. > - Fixed an incorrect device-type mapping that identified Third Reality soil moisture sensors as temperature sensors, preventing soil moisture readings from being reported. > - Fixed an issue where room assignments, accessory names, scenes, and automations for SONOFF TRVs in Apple Home could be lost after a ZBBridge-U restart. > - Fixed an issue where color controls were unavailable on Matter-enabled platforms for GLEDOPTO GL-C\_202P controllers that support color control but not color temperature control. > **v3.5.0 what's new** > > ## Beta Version 3.5.0 (2026/07/08) > > **New Features:** > > - **Expanded Device Compatibility:** Added support for the following Zigbee devices: > - SONOFF SNZB-09P Zigbee indoor siren > - SONOFF TRV-ZBT Zigbee + Bluetooth thermostatic radiator valve > - SONOFF MINI-ZB1GS single-channel Zigbee smart switch > > - **Matter Bridge Update:** Now supports syncing energy metering data from connected Zigbee devices to Matter-enabled platforms, including total export energy and total consumption. > > **Optimizations:** > > - **Water Valve Unit Options:** Added imperial gallon as a volume unit option for the following SONOFF smart water valves: > - Single-channel valves: SWV-ZNU / SWV-ZNE / SWV-ZFU / SWV-ZFE > - Dual-channel valves: SWV-ZF2U / SWV-ZF2E > > - **Expanded Local Web Portal Support:** Added a quick access to the ZBBridge-U device compatibility list. > > **Bug Fix:** > > - **Mapping issue:** Fixed incorrect device type mapping for Giex GX03 Zigbee dual-channel water valves. > **v3.3.0 what's new** > > ## Beta Version 3.3.0 (2026/06/26) > > **New Features:** > > - **Expanded Device Compatibility:** Added support for SONOFF MINI-ZB1GP / MINI-ZB1GSP single-channel Zigbee smart switches with electricity monitoring. > - **Home Assistant Audio Automations:** Added support for playing audio from Home Assistant through the ZBBridge-U speaker, enabling audio-based automations. > - **Expanded Matter Hub Compatibility:** Now supports syncing bridged dimmable lights along with the Matter Bridge when it is added to ZBBridge-U. > > **Optimizations:** > > - **Firmware Recovery Improvement:** Improved the factory reset logic for better performance and stability. > - **Matter Bridge Update:** Now supports syncing Boost Mode from SONOFF TRVZB to third-party Matter platforms. > - **Matter Sync:** More Wi-Fi devices can now be synced to Matter-enabled platforms, including: > - CoolKit CK-BL602-TC-01 (216) gate operator > - CoolKit NON-OTA-GL (272) eWeLink thermo plugin > > **Bug Fix:** > > - Fixed an issue where SONOFF SNZB-02M could incorrectly show air pressure comfort as out of range when no air pressure comfort range was configured. > **v3.1.0 what's new** > > ## Beta Version 3.1.0 (2026/06/09) > > **Expanded Device Compatibility:** > > - Added support for SONOFF SNZB-03PR2 Zigbee motion sensor with illuminance reporting. > > **Optimizations:** > > - SONOFF SNZB-02DR2 now supports using SONOFF SNZB-02M and SNZB-02B as external sensors for more accurate room temperature readings. > - Improved support for metering capabilities on Zigbee single-channel smart plugs with energy monitoring. ---
**Author:** ![KwayLi99](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/kwayli99/32/7691_2.png) [@KwayLi99](https://forum.ewelink.cc/u/KwayLi99)\ **Post date:** [June 23, 2026, 6:43am UTC](https://forum.ewelink.cc/t/release-note-bridge-u-zigbee-bridge-ultra-beta-version-update/208641/2 "2026-06-23T06:43:36Z")
---
**Author:** ![Unnamedi](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/unnamedi/32/5677_2.png) [@Unnamedi](https://forum.ewelink.cc/u/Unnamedi)\ **Post date:** [June 23, 2026, 3:50pm UTC](https://forum.ewelink.cc/t/release-note-bridge-u-zigbee-bridge-ultra-beta-version-update/208641/3 "2026-06-23T15:50:59Z")
> [@KwayLi99](#): > > Beta Version 3.3.0 (2026/06/18) I haven’t received that version yet; I’m still stuck on 3.1.1. Both the bridge and the app say it’s on the latest version! Considering the release date, it’s been quite a while! ---
**Author:** ![KwayLi99](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/kwayli99/32/7691_2.png) [@KwayLi99](https://forum.ewelink.cc/u/KwayLi99)\ **Post date:** [June 24, 2026, 2:22am UTC](https://forum.ewelink.cc/t/release-note-bridge-u-zigbee-bridge-ultra-beta-version-update/208641/4 "2026-06-24T02:22:01Z")
---
**Author:** ![KwayLi99](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/kwayli99/32/7691_2.png) [@KwayLi99](https://forum.ewelink.cc/u/KwayLi99)\ **Post date:** [June 24, 2026, 2:27am UTC](https://forum.ewelink.cc/t/release-note-bridge-u-zigbee-bridge-ultra-beta-version-update/208641/5 "2026-06-24T02:27:05Z")
Sorry for the confusion. The new version is expected to be released today. I’ve unlisted the post for now and will republish it once the update is officially available ---
**Author:** ![KwayLi99](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/kwayli99/32/7691_2.png) [@KwayLi99](https://forum.ewelink.cc/u/KwayLi99)\ **Post date:** [June 30, 2026, 8:30am UTC](https://forum.ewelink.cc/t/release-note-bridge-u-zigbee-bridge-ultra-beta-version-update/208641/6 "2026-06-30T08:30:41Z")
---
**Author:** ![r.brizzolesi](https://avatars.discourse-cdn.com/v4/letter/r/919ad9/32.png) [@r.brizzolesi](https://forum.ewelink.cc/u/r.brizzolesi)\ **Post date:** [July 2, 2026, 7:43am UTC](https://forum.ewelink.cc/t/release-note-bridge-u-zigbee-bridge-ultra-beta-version-update/208641/7 "2026-07-02T07:43:00Z")
261 With the new version 3.3.0, when I activate any security mode, after the classic three beeps that warn me that the selected mode is being activated, the beeps continue indefinitely!!! The only solution is to lower the volume or restart the Bridge!!! ---
**Author:** ![Minnie](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/minnie/32/9791_2.png) [@Minnie](https://forum.ewelink.cc/u/Minnie)\ **Post date:** [July 3, 2026, 7:08am UTC](https://forum.ewelink.cc/t/release-note-bridge-u-zigbee-bridge-ultra-beta-version-update/208641/8 "2026-07-03T07:08:01Z")
Hello, we sincerely apologize for the inconvenience caused. We take your feedback regarding the “alarm sound continuing indefinitely after security mode is activated” very seriously. To help us accurately identify and resolve the issue, could you please provide the following details: 1. When setting up the security mode, did you configure any specific sub‑device as the trigger condition? Did you set the alarm duration to “continuous”? 2. Have you experienced this issue before, or did it only start occurring after upgrading to the new version? We apologize again for the inconvenience caused. Thank you for your cooperation and understanding! ---
**Author:** ![r.brizzolesi](https://avatars.discourse-cdn.com/v4/letter/r/919ad9/32.png) [@r.brizzolesi](https://forum.ewelink.cc/u/r.brizzolesi)\ **Post date:** [July 3, 2026, 7:46am UTC](https://forum.ewelink.cc/t/release-note-bridge-u-zigbee-bridge-ultra-beta-version-update/208641/9 "2026-07-03T07:46:08Z")
solo dopo l’aggiornamento alla versione 3.3.0 ! ---
**Author:** ![Minnie](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/minnie/32/9791_2.png) [@Minnie](https://forum.ewelink.cc/u/Minnie)\ **Post date:** [July 3, 2026, 8:07am UTC](https://forum.ewelink.cc/t/release-note-bridge-u-zigbee-bridge-ultra-beta-version-update/208641/10 "2026-07-03T08:07:29Z")
We would like to understand some details about your security settings. Could you please let us know: 1. Which specific sub‑devices did you set as trigger conditions when configuring the security mode? (e.g., door/window sensors, motion sensors, etc.) 2 .Did you set the alarm duration to “continuous” (i.e., indefinitely)? If convenient, you may also submit logs via the local web page or the eWeLink app, which will help us locate the issue more quickly. Thank you for your cooperation! ---
**Author:** ![r.brizzolesi](https://avatars.discourse-cdn.com/v4/letter/r/919ad9/32.png) [@r.brizzolesi](https://forum.ewelink.cc/u/r.brizzolesi)\ **Post date:** [July 6, 2026, 10:40am UTC](https://forum.ewelink.cc/t/release-note-bridge-u-zigbee-bridge-ultra-beta-version-update/208641/11 "2026-07-06T10:40:17Z")
Il suono che si sente non è quello dell’allarme ma il Bip che fa di solito quando si inserisce o disinserisce l’allarme , solo che di solito fa tre Bip , ora non smette più ! ![1783334024364](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/7/72ce7d947bffe1fa55adb8f85d61e578d96402e0.jpeg) ![1783333940368](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/a/a45d62678cfdb86a006b8fb63ec7c63cb4756922.jpeg) ![1783333888172](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/b/b2056169e1eba15e48d90c66f9f65d218d7ac660.jpeg) ---
**Author:** ![r.brizzolesi](https://avatars.discourse-cdn.com/v4/letter/r/919ad9/32.png) [@r.brizzolesi](https://forum.ewelink.cc/u/r.brizzolesi)\ **Post date:** [July 6, 2026, 10:44am UTC](https://forum.ewelink.cc/t/release-note-bridge-u-zigbee-bridge-ultra-beta-version-update/208641/12 "2026-07-06T10:44:19Z")
Ho notato anche che pur avendo impostato come durata del suono di allarme 2 minuti , ora se scatta l’allarme il suono di allarme dura solo 1 secondo !!! ---
**Author:** ![Minnie](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/minnie/32/9791_2.png) [@Minnie](https://forum.ewelink.cc/u/Minnie)\ **Post date:** [July 6, 2026, 11:11am UTC](https://forum.ewelink.cc/t/release-note-bridge-u-zigbee-bridge-ultra-beta-version-update/208641/13 "2026-07-06T11:11:34Z")
Hello, thank you for your feedback. We sincerely apologize for the unsatisfactory experience you have encountered. Please submit the device logs via the **local web interface** or the eWeLink APP, and select the ZBBridge-U device when submitting. Upon receipt of the logs, our technical team will immediately conduct issue analysis and troubleshooting. ---
**Author:** ![r.brizzolesi](https://avatars.discourse-cdn.com/v4/letter/r/919ad9/32.png) [@r.brizzolesi](https://forum.ewelink.cc/u/r.brizzolesi)\ **Post date:** [July 13, 2026, 9:00am UTC](https://forum.ewelink.cc/t/release-note-bridge-u-zigbee-bridge-ultra-beta-version-update/208641/14 "2026-07-13T09:00:45Z")
Salve. Dopo l’aggiornamento del Bridge-U alla versione 3.5.0 il problema rimane ! Dopo aver disattivato l’allarme il Bridge continua ad emettere il Bip-Bip !!! ---
**Author:** ![r.brizzolesi](https://avatars.discourse-cdn.com/v4/letter/r/919ad9/32.png) [@r.brizzolesi](https://forum.ewelink.cc/u/r.brizzolesi)\ **Post date:** [July 28, 2026, 10:36am UTC](https://forum.ewelink.cc/t/release-note-bridge-u-zigbee-bridge-ultra-beta-version-update/208641/15 "2026-07-28T10:36:21Z")
Still no solution to my problem? But it’s possible that no one is using it as a surveillance device without having the same problem as me. I don’t know how else to explain it: whether I enable or disable security mode, the Bridge continues to beep endlessly!!! ---
**Author:** ![Minnie](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/minnie/32/9791_2.png) [@Minnie](https://forum.ewelink.cc/u/Minnie)\ **Post date:** [July 29, 2026, 2:02am UTC](https://forum.ewelink.cc/t/release-note-bridge-u-zigbee-bridge-ultra-beta-version-update/208641/16 "2026-07-29T02:02:05Z")
We sincerely apologize for the inconvenience this has caused you. We have not yet received the logs you submitted, and our technical team has been unable to reproduce the issue you described, where the device continues to emit a beeping sound after the security mode is enabled. To further investigate and resolve this as quickly as possible, please follow the steps below to submit your logs: Please submit the system logs via the local web page or the eWeLink App. When submitting via the eWeLink App, please select the ZBBridge‑U device and make sure to check the **“Upload logs”** option. After submission, please let us know your ticket number. Our technical team will analyze the logs and provide a solution as soon as possible after receiving them. Thank you for your cooperation！ ![-U 日志（App提交）](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/8/851d3fe7f96ba6e963f6317bf9ffe41671179c9c.jpeg) ---
**Author:** ![r.brizzolesi](https://avatars.discourse-cdn.com/v4/letter/r/919ad9/32.png) [@r.brizzolesi](https://forum.ewelink.cc/u/r.brizzolesi)\ **Post date:** [July 29, 2026, 6:33am UTC](https://forum.ewelink.cc/t/release-note-bridge-u-zigbee-bridge-ultra-beta-version-update/208641/17 "2026-07-29T06:33:46Z")
I submitted the feedback and this is what appears in the app ![1785306560324](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/0/04e573042c15e4e0de0516482c51bbe45052f08a.jpeg) ---
**Author:** ![r.brizzolesi](https://avatars.discourse-cdn.com/v4/letter/r/919ad9/32.png) [@r.brizzolesi](https://forum.ewelink.cc/u/r.brizzolesi)\ **Post date:** [July 29, 2026, 6:36am UTC](https://forum.ewelink.cc/t/release-note-bridge-u-zigbee-bridge-ultra-beta-version-update/208641/18 "2026-07-29T06:36:05Z")
Where can I find the ticket number? ---
**Author:** ![r.brizzolesi](https://avatars.discourse-cdn.com/v4/letter/r/919ad9/32.png) [@r.brizzolesi](https://forum.ewelink.cc/u/r.brizzolesi)\ **Post date:** [July 29, 2026, 6:54am UTC](https://forum.ewelink.cc/t/release-note-bridge-u-zigbee-bridge-ultra-beta-version-update/208641/19 "2026-07-29T06:54:36Z")
I ask you if it is possible to go back to the previous firmware ---
**Author:** ![Minnie](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/minnie/32/9791_2.png) [@Minnie](https://forum.ewelink.cc/u/Minnie)\ **Post date:** [July 30, 2026, 3:44am UTC](https://forum.ewelink.cc/t/release-note-bridge-u-zigbee-bridge-ultra-beta-version-update/208641/20 "2026-07-30T03:44:40Z")
Hello, thank you for providing the logs. We have received the device logs you submitted, and our technical team will analyze them as soon as possible to identify the issue and aim to fix it in a future update. Regarding your question about rolling back to a previous firmware version, we currently do not support downgrading to earlier versions. This is because firmware updates often involve changes to the underlying protocol, security patches, and data format, and rolling back may cause inconsistencies or other unexpected issues. We will investigate the problem you reported promptly, and if it is confirmed to be a firmware bug, we will release a fix in a subsequent version. We appreciate your patience and understanding. Thank you again for your support and understanding! [Next page](https://forum.ewelink.cc/t/release-note-bridge-u-zigbee-bridge-ultra-beta-version-update/208641.md?page=2)