# Problem with personal scenario

**URL:** <https://forum.ewelink.cc/t/problem-with-personal-scenario/206974>\
**Category:** Ideas & Suggestion\
**Tags:** scene\
**Created:** [December 20, 2025, 2:36pm UTC](https://forum.ewelink.cc/t/problem-with-personal-scenario/206974 "2025-12-20T14:36:29Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![raffy96](https://avatars.discourse-cdn.com/v4/letter/r/7ba0ec/32.png) [@raffy96](https://forum.ewelink.cc/u/raffy96)\
**Post date:** [December 20, 2025, 2:36pm UTC](https://forum.ewelink.cc/t/problem-with-personal-scenario/206974/1 "2025-12-20T14:36:30Z")

</div>

Hello everyone,

I have 3 TRVZB valves connected to an NS Panel Pro. I created some scenes to set a specific temperature and mode on the valves when I leave or enter the house.

I noticed that when I switch from automatic mode to manual mode via a scene, the valves do change mode, but the set temperature is not applied. I also noticed that if the valves were previously set to manual mode with a different temperature, they overwrite the value set by the scene, as you can see in the video I recorded.

Could this be a bug?

---

<div class="post-metadata">

**Author:** ![eerke](https://avatars.discourse-cdn.com/v4/letter/e/eb9ed0/32.png) [@eerke](https://forum.ewelink.cc/u/eerke)\
**Post date:** [December 20, 2025, 4:29pm UTC](https://forum.ewelink.cc/t/problem-with-personal-scenario/206974/2 "2025-12-20T16:29:33Z")

</div>

Although I have TRVZB they are connected locally to an iHost so I can’t replicate this, but, as a bodge, have you tried adding a delay to the scene and then setting the TRV temperature?

---

<div class="post-metadata">

**Author:** ![raffy96](https://avatars.discourse-cdn.com/v4/letter/r/7ba0ec/32.png) [@raffy96](https://forum.ewelink.cc/u/raffy96)\
**Post date:** [December 20, 2025, 5:50pm UTC](https://forum.ewelink.cc/t/problem-with-personal-scenario/206974/3 "2025-12-20T17:50:51Z")

</div>

The scene correctly sets the mode. If the TRVZB is set to **Auto** and the scene is triggered, it correctly switches to **Manual** mode.  
However, I noticed that the **physical valve does not update the temperature value** set by the scene.

What seems to happen is that the scene briefly updates the temperature correctly in the eWeLink app, but right after that it gets **overwritten by the temperature value physically set on the TRVZB** while in Manual mode.

Here is the test scenario in more detail:

1. The TRVZB is physically set to **Auto mode** with the temperature set to **15°C**.

2. Set physically to **Auto mode** with the temperature set to **19°C**.

3. Using the eWeLink app or the **NSPanel** , I trigger a scene that sets the TRVZB to **Manual mode** with a target temperature of **18°C**.

4. In the eWeLink app, I can confirm that the device switches to **Manual mode** and initially shows the temperature set by the scene ( **18°C** ), but almost immediately the displayed value changes back to the temperature physically set on the valve ( **15°C** ).

5. Physically, the TRVZB does switch to **Manual mode** , but it does **not receive or keep the target temperature** set by the scene.
