# Presence Simulation and 4 Channel Pro

**URL:** <https://forum.ewelink.cc/t/presence-simulation-and-4-channel-pro/24419>\
**Category:** Free discussion\
**Created:** [November 14, 2023, 4:52pm UTC](https://forum.ewelink.cc/t/presence-simulation-and-4-channel-pro/24419 "2023-11-14T16:52:15Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![homestuff](https://avatars.discourse-cdn.com/v4/letter/h/dec6dc/32.png) [@homestuff](https://forum.ewelink.cc/u/homestuff)\
**Post date:** [November 14, 2023, 4:52pm UTC](https://forum.ewelink.cc/t/presence-simulation-and-4-channel-pro/24419/1 "2023-11-14T16:52:15Z")

</div>

When using Presence Simulation is there a way of selecting the individual channels of a 4 Channel Pro 3. It would appear that you can only select the complete device.