# Only 10 till 11 devices are possible

**URL:** <https://forum.ewelink.cc/t/only-10-till-11-devices-are-possible/28300>\
**Category:** Free discussion\
**Created:** [February 10, 2024, 6:19pm UTC](https://forum.ewelink.cc/t/only-10-till-11-devices-are-possible/28300 "2024-02-10T18:19:03Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![zuse9090](https://avatars.discourse-cdn.com/v4/letter/z/58f4c7/32.png) [@zuse9090](https://forum.ewelink.cc/u/zuse9090)\
**Post date:** [February 10, 2024, 6:19pm UTC](https://forum.ewelink.cc/t/only-10-till-11-devices-are-possible/28300/1 "2024-02-10T18:19:03Z")

</div>

Hi, I can only add 10, sometimes 11 devices to my eWeLink with Sonoff Bridge Pro (v1.8). I tested it with two Sonoff Bridges because I thought the bridge is broken, but no change. After 11 devices I can’t add an additional.  
I have the eWeLink advanced plan.

What can I do?  
Cheers

---

<div class="post-metadata">

**Author:** ![eerke](https://avatars.discourse-cdn.com/v4/letter/e/eb9ed0/32.png) [@eerke](https://forum.ewelink.cc/u/eerke)\
**Post date:** [February 10, 2024, 10:20pm UTC](https://forum.ewelink.cc/t/only-10-till-11-devices-are-possible/28300/2 "2024-02-10T22:20:22Z")

</div>

Zigbee devices?

Assuming it is there is a limit to the number of directly connected end-devices. You could add a router device but with two you could turn one of them into a router for the other one by putting Tasmota on it.

Wrong link. That is how to install coordinator firmware. This is simpler.

---

<div class="post-metadata">

**Author:** ![zuse9090](https://avatars.discourse-cdn.com/v4/letter/z/58f4c7/32.png) [@zuse9090](https://forum.ewelink.cc/u/zuse9090)\
**Post date:** [February 11, 2024, 12:56pm UTC](https://forum.ewelink.cc/t/only-10-till-11-devices-are-possible/28300/3 "2024-02-11T12:56:00Z")

</div>

Yes Zigbee devices. But it can’t be that just 10 devices are passive with the zigbee bridge. I will not flash and set up a raspi eg to solve the issue.  
It is sad to double the costs.

---

<div class="post-metadata">

**Author:** ![zuse9090](https://avatars.discourse-cdn.com/v4/letter/z/58f4c7/32.png) [@zuse9090](https://forum.ewelink.cc/u/zuse9090)\
**Post date:** [February 18, 2024, 7:39pm UTC](https://forum.ewelink.cc/t/only-10-till-11-devices-are-possible/28300/4 "2024-02-18T19:39:29Z")

</div>

From sonoff support  
ZB Bridge-P can connect 26 sub-devices directly (10 end devices + 16 routers, or 26 routers). If you want to add more than 10 end devices, routers are required.

Router: S40 Lite ZB smart plug, S31 Lite ZB smart plug, S26R2ZB smart plug,ZBMINI smart switch

End Device: ZBMINI-L smart switch, SNZB-01 switch, SNZB-02 Temp. and Hum. sensor, SNZB-03 motion sensor, SNZB-04 door/window sensor