# NSPanel Pro v4.4.0 Officially Released: New Features & Enhancements **URL:** \ **Category:** NSPanel Pro\ **Created:** [February 14, 2026, 5:32am UTC](https://forum.ewelink.cc/t/nspanel-pro-v4-4-0-officially-released-new-features-enhancements/207640 "2026-02-14T05:32:09Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![JoJo](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/jojo/32/8655_2.png) [@JoJo](https://forum.ewelink.cc/u/JoJo)\ **Post date:** [February 14, 2026, 5:32am UTC](https://forum.ewelink.cc/t/nspanel-pro-v4-4-0-officially-released-new-features-enhancements/207640/1 "2026-02-14T05:32:09Z")
Dear NSPanel Pro Users, Thank you for your continued attention and support! We are pleased to announce that the NSPanel Pro V4.4.0 firmware has been officially released. This update focuses on strengthening integration with Home Assistant, bringing smarter thermostat controls, deeper personalization, and numerous usability enhancements—all designed to make your smart panel more powerful and intuitive. * * * ## New Features Overview ### Core Features - Zigbee Improvement in Performance and Compatibility The built-in Zigbee NCP firmware will be upgraded to 8.x, and we’ll fully incorperate zigbee-herdsman and zigbee-herdsman-converters to better support 3rd-party and non-standard Zigbee devices. - Enhanced Home Assistant Integration via MQTT NSPanel Pro now exposes more of its native capabilities to Home Assistant, enabling you to: These new entities can be used in automations, dashboards, and scenes, further tightening the bond between NSPanel Pro and your smart home. ### Additional Features - New Device Support - Do Not Disturb Mode Added Do Not Disturb mode with scheduling and per-category notification exceptions, reducing unwanted interruptions while still allowing important alerts. - Personal Image Screen Saver NSPanel Pro can now use personal images uploaded via the eWeLink App for its screen saver. - Added Adaptive Mode for SONOFF TRVZB, configurable in the eWeLink App, to help maintain a more stable room temperature. - Central Heating System Improvements - UI/UX Optimizations - Block Firmware Updates toggle: Added a Block Firmware Updates toggle to stop automatic firmware update checks and downloads. ### Bugfixes Several known issues have been fixed, improving system stability. This release implements **some of the features** outlined in our product roadmap. Please refer to [NSPanel Pro Roadmap and Co-Created Future - NSPanel Pro - eWeLink Forum](https://forum.ewelink.cc/t/nspanel-pro-roadmap-and-co-created-future/206240) for more details. * * * ## Detailed Operation Tutorials To help you quickly get started with the new features, we’ve provided detailed step-by-step guides for each major feature, including both eWeLink App and NSPanel Pro screen operations. Please ensure your NSPanel Pro has been upgraded to `v4.4.0` **Note:** 1. v4.4.0 is a beta release for selected devices. If you would like to experience the latest features, please join through the [_NSPanel Pro v4.xx Beta Test Application Tool._](https://forum.ewelink.cc/t/nspanel-pro-v4-x-x-beta-test-application-tool-now-open/206399/108) 2. Please ensure your App version is `v5.22.2`or above. The current eWeLink App `v5.22.2` was submitted to the Google Play Store for review on February 10th and is expected to support updates in about a week. * * * ### Tutorial 1: Zigbee Improvement in Performance and Compatibility No operation required. ### Tutorial 2: Enhanced Home Assistant Integration via MQTT You can now play audio directly on NSPanel Pro from Home Assistant — either by selecting a pre-uploaded audio file or entering a URL to stream. **Note** : If you have already configured an MQTT Broker via the eWeLink App before this version, after upgrading to `v4.4.0`, NSPanel Pro will automatically connect to the configured Home Assistant. #### App Operation Steps: Please refer to: [https://forum.ewelink.cc/t/nspanel-pro-v4-1-0-release-new-features-enhancements/206443](https://forum.ewelink.cc/t/nspanel-pro-v4-1-0-release-new-features-enhancements/206443) 1. In the App, go to `NSPanel Pro > Device Settings > Home Assistant > Click Get Started`. After completing the MQTT Broker configuration,NSPanel Pro will automatically connect to the Home Assistant platform previously configured. 2. Once connected, you can view and control NSPanel Pro in Home Assistant. The newly added supported functions include: * * * ### Tutorial 3: Setting Up Do Not Disturb Mode - **App Operation Steps:** ![322bd1c43bdc4e68918cc52c7b6684f3](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/8/808a158821a18316e7a2369a472d0b7e3082cf7d.png) ![6d7ef9ac7c624a70a03130466af27b10](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/e/e06176f17269bc0423a94508260bf4d3d4e208ca.png) ![9a0af5915c6f49998a688f1a3b4fbf2e](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/a/aa824982bac90a4ba16e7df6941e7c4964728f1e.png) - **NSPanel Pro Screen Operation Steps:** On the panel, only “Do Not Disturb mode” can be enabled or disabled; configuration options are not directly supported on the device screen. * * * ## Bug Fixes & Gratitude In the v4.4.0 release, we’ve fixed several issues reported by our community. Special thanks to all users who took the time to share feedback on our forum. Your reports help us identify and resolve issues quickly, making NSPanel Pro better for everyone. **Notable fixes include:** - Fixed an issue where the Home App selection in NSPanel Pro wasn’t applied as expected after it was configured in Android system settings. - Improved multi-channel device tile with more intuitive interactions. - Camera orientation switching is more reliable. - eWeLink‑Remote status syncs properly even when the screen is off. We sincerely thank all users who reported issues! If you encounter any new problems after upgrading, please feel free to post in the forum or contact our support team. Your feedback is the driving force behind our progress. * * * ## Conclusion V4.4.0 makes your NSPanel Pro more powerful, open, and user-friendly with deeper Home Assistant integration, smarter heating controls, richer personalization, and a host of thoughtful optimizations. If you experience any difficulties during the upgrade or while using the new features, please join the discussion on our community forum. Your insights are invaluable and help shape the future of NSPanel Pro. Thank you for your ongoing support. **The NSPanel Pro Team** [Release Date] ---
**Author:** ![chriss2](https://avatars.discourse-cdn.com/v4/letter/c/a4c791/32.png) [@chriss2](https://forum.ewelink.cc/u/chriss2)\ **Post date:** [February 14, 2026, 9:30am UTC](https://forum.ewelink.cc/t/nspanel-pro-v4-4-0-officially-released-new-features-enhancements/207640/2 "2026-02-14T09:30:37Z")
Hello again. After the last update to version 4.4.0, I noticed: one panel started to heat up and make sounds like tapping on the screen (10022e4e38). A similar situation, but without heating, occurred with panels 10022e4eba and 10022e4ebe. ---
**Author:** ![massimo01](https://avatars.discourse-cdn.com/v4/letter/m/a4c791/32.png) [@massimo01](https://forum.ewelink.cc/u/massimo01)\ **Post date:** [February 14, 2026, 11:26am UTC](https://forum.ewelink.cc/t/nspanel-pro-v4-4-0-officially-released-new-features-enhancements/207640/3 "2026-02-14T11:26:07Z")
Hi guys Thank you for the update and to listen to all our requests. I know the system is not perfect yet but we getting there. I personally use home assistant as my main app as I have many devices but I love the nspanel screensaver, with latest version I can now have the screensaver active and wake up the screen in home assistant mode just by waving my hand I also made an automation in HA to wake screen up if door bell or any other cameras sensor triggers off. @jojo One question that I have not understood and I need help to setup my Sonos speakers I see you guys added support for this but no too sure how to pair them. Again thank you for your work ![IMG_2243](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/a/a9cca3412ab2709f9c4e12188bf5b82fac7b1129.jpeg) ![IMG_2244](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/b/bf87e3937036e5594895826c7b3a469585b85223.jpeg) ![IMG_2246](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/4/4cd1e8e177e6ae90f7d51743e1c7ad643ad6884f.jpeg) ---
**Author:** ![Stophammer](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/stophammer/32/8746_2.png) [@Stophammer](https://forum.ewelink.cc/u/Stophammer)\ **Post date:** [February 14, 2026, 1:38pm UTC](https://forum.ewelink.cc/t/nspanel-pro-v4-4-0-officially-released-new-features-enhancements/207640/4 "2026-02-14T13:38:44Z")
Hello. I’m testing the new TRVZB adaptive mode, but my heating isn’t turning off when it should. Currently my heating is set at 19°C, but two rooms are at 20°C and still heating. To stop this, I had to turn the heating off and then enable the schedule again. ![Adaptive Mode 1](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/5/505bd34f4632c6f2ec44400d3682f5af06abf679.jpeg) ![Adaptive Mode 2](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/5/573340fbe0852cde8b29ec03f3e5a309397e0de4.jpeg) ---
**Author:** ![Stophammer](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/stophammer/32/8746_2.png) [@Stophammer](https://forum.ewelink.cc/u/Stophammer)\ **Post date:** [February 15, 2026, 12:40pm UTC](https://forum.ewelink.cc/t/nspanel-pro-v4-4-0-officially-released-new-features-enhancements/207640/5 "2026-02-15T12:40:56Z")
This happened again today. I’ve submitted feedback. ![2026-02-15-12-33-52-333](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/1/1c7e626e6bb18099096e45f0387a94a02b41f5d0.jpeg) ![2026-02-15-12-32-39-954](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/b/bec122266ebf3cd4e73836336259d3daff23605a.jpeg) ---
**Author:** ![francois.pitre](https://avatars.discourse-cdn.com/v4/letter/f/6de8d8/32.png) [@francois.pitre](https://forum.ewelink.cc/u/francois.pitre)\ **Post date:** [February 15, 2026, 3:15pm UTC](https://forum.ewelink.cc/t/nspanel-pro-v4-4-0-officially-released-new-features-enhancements/207640/6 "2026-02-15T15:15:05Z")
```auto ``` I appreciate the NS Panel Pro 120; I hope the MQTT instability issue has been resolved. Adding the proximity sensor to Home Assistant is wonderful. Is it possible to increase the detection distance from 30cm to 60cm? My panel is in a hallway, and a distance of 60cm would be perfect for detecting people passing by. Keep up the good work. ---
**Author:** ![pettorossihernan](https://avatars.discourse-cdn.com/v4/letter/p/54ee81/32.png) [@pettorossihernan](https://forum.ewelink.cc/u/pettorossihernan)\ **Post date:** [February 16, 2026, 12:25am UTC](https://forum.ewelink.cc/t/nspanel-pro-v4-4-0-officially-released-new-features-enhancements/207640/7 "2026-02-16T00:25:06Z")
As I have seen for now, we can o lo playback the audio files that had been recorded from the mic record button. Is It posible to upload other files to nspp? Or Is It posible to set an soeaker audio address for an audio file stored in my ha OS? ---
**Author:** ![Radaristanbul](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/radaristanbul/32/9848_2.png) [@Radaristanbul](https://forum.ewelink.cc/u/Radaristanbul)\ **Post date:** [February 16, 2026, 10:20am UTC](https://forum.ewelink.cc/t/nspanel-pro-v4-4-0-officially-released-new-features-enhancements/207640/8 "2026-02-16T10:20:45Z")
Hello guys, First of all, thank you in advance for your effort and for the update. After the update, the first issue I experienced is that the NSPanel Pro started making strange “tick tick tick” sounds. This happens whether the screensaver is active, while navigating the menus, or even when I’m watching the cameras. When this occurs, restarting the device sometimes stops the noise temporarily, but lately this issue has become more frequent and it has started to bother me. I have just sent you feedback about this issue as well. ![photo_2026-02-16_13-19-43](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/8/8306c1a9b9e889d6a961517f349830c11eddd082.jpeg) ![photo_2026-02-16_13-19-50](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/5/56827d3e10f9eb068c64e43d8829f72747f2dd92.jpeg) ---
**Author:** ![danielk117](https://avatars.discourse-cdn.com/v4/letter/d/eb9ed0/32.png) [@danielk117](https://forum.ewelink.cc/u/danielk117)\ **Post date:** [February 17, 2026, 1:10pm UTC](https://forum.ewelink.cc/t/nspanel-pro-v4-4-0-officially-released-new-features-enhancements/207640/9 "2026-02-17T13:10:57Z")
I’m hearing tap sound, too. I think thats because of the new poximity wakeup feature. (I don’t know if there is a real sensor or they just do some light sensor magic.) When connecting the panel via mqtt to home assistant, you’re getting a new control and sensor for this feature. ![grafik](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/d/d650a55d90569d9eee73a15bad06fea4ce53b417.png) When the control is on and the display is off, the display wakes up when I’m near to it. And I can hear the tap sound. When the control off, the display stays off and no tap sound appears. I hate the sound, whether it’s from taping or waking up. I was happy to discover that it can be disabled (Settings \> Advanced Settings \> Sound \> Touch Sounds). ---
**Author:** ![mario.georgiev](https://avatars.discourse-cdn.com/v4/letter/m/71e660/32.png) [@mario.georgiev](https://forum.ewelink.cc/u/mario.georgiev)\ **Post date:** [February 17, 2026, 3:53pm UTC](https://forum.ewelink.cc/t/nspanel-pro-v4-4-0-officially-released-new-features-enhancements/207640/10 "2026-02-17T15:53:16Z")
How can I add my Sonos speakers? Is there a step by step guide for this? ---
**Author:** ![Jojkoba](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/jojkoba/32/8490_2.png) [@Jojkoba](https://forum.ewelink.cc/u/Jojkoba)\ **Post date:** [February 17, 2026, 5:07pm UTC](https://forum.ewelink.cc/t/nspanel-pro-v4-4-0-officially-released-new-features-enhancements/207640/11 "2026-02-17T17:07:29Z")
Is the new feature that the LCD is still lit and the speaker is popping! ---
**Author:** ![Stophammer](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/stophammer/32/8746_2.png) [@Stophammer](https://forum.ewelink.cc/u/Stophammer)\ **Post date:** [February 17, 2026, 11:11pm UTC](https://forum.ewelink.cc/t/nspanel-pro-v4-4-0-officially-released-new-features-enhancements/207640/12 "2026-02-17T23:11:50Z")
> [@danielk117](#): > > tap sound I was hearing that whenever my hand went near the screen. I’ve turned off the ‘Wake on Proximity’, and it’s stopped. Mine seemed to be very sensitive, as it turned the screen on when I entered the room. ---
**Author:** ![derPate1989](https://avatars.discourse-cdn.com/v4/letter/d/898d66/32.png) [@derPate1989](https://forum.ewelink.cc/u/derPate1989)\ **Post date:** [February 18, 2026, 5:50am UTC](https://forum.ewelink.cc/t/nspanel-pro-v4-4-0-officially-released-new-features-enhancements/207640/13 "2026-02-18T05:50:22Z")
I also have this “clicking” sound. When I disable “Wake on Proximity,” it goes away. I suspect these are the touch tones from Android when you tap. And in Home Assistant, its flapping 🙂 [](https://www.youtube.com/watch?v=sQ7MsELUXas) ---
**Author:** ![danielk117](https://avatars.discourse-cdn.com/v4/letter/d/eb9ed0/32.png) [@danielk117](https://forum.ewelink.cc/u/danielk117)\ **Post date:** [February 18, 2026, 7:44am UTC](https://forum.ewelink.cc/t/nspanel-pro-v4-4-0-officially-released-new-features-enhancements/207640/14 "2026-02-18T07:44:30Z")
> [@derPate1989](#): > > I suspect these are the touch tones from Android when you tap. Exactly. I think when “Wake on” is enabled, a tap is simulated to activate the display (or keep it activated). Thats why we hear the tap sound. When you’ve disabled the sound (like I discribed above), the “Wake on” works like before but the sound doesn’t appear. ---
**Author:** ![xerex1](https://avatars.discourse-cdn.com/v4/letter/x/9e8a1a/32.png) [@xerex1](https://forum.ewelink.cc/u/xerex1)\ **Post date:** [February 23, 2026, 9:32am UTC](https://forum.ewelink.cc/t/nspanel-pro-v4-4-0-officially-released-new-features-enhancements/207640/15 "2026-02-23T09:32:23Z")
What does turbo do? Did you manage to play sound on the device? Thank you 🙂 ---
**Author:** ![magican82](https://avatars.discourse-cdn.com/v4/letter/m/8baadc/32.png) [@magican82](https://forum.ewelink.cc/u/magican82)\ **Post date:** [February 23, 2026, 12:27pm UTC](https://forum.ewelink.cc/t/nspanel-pro-v4-4-0-officially-released-new-features-enhancements/207640/16 "2026-02-23T12:27:33Z")
hello sonoff staff dear, I have nspanel pro ver 3.4.1 but, my device not responce via running system update can you help me? my device id 10023a837c ---
**Author:** ![Milk](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/milk/32/8679_2.png) [@Milk](https://forum.ewelink.cc/u/Milk)\ **Post date:** [February 24, 2026, 6:12am UTC](https://forum.ewelink.cc/t/nspanel-pro-v4-4-0-officially-released-new-features-enhancements/207640/17 "2026-02-24T06:12:48Z")
![image](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/f/fd8b86ed002075eec2965ef87390d431efaa1164.png) @mario.georgiev For now, you can bind Sonos by adding a third-party service in eWeLink Web. Once successfully linked, you can sync your Sonos speakers to NSPanelPro via the eWeLink app for use (Sonos service binding is expected to be supported in the next version of the app). Another important note: This feature requires a membership on the web platform. ---
**Author:** ![Milk](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/milk/32/8679_2.png) [@Milk](https://forum.ewelink.cc/u/Milk)\ **Post date:** [February 24, 2026, 6:29am UTC](https://forum.ewelink.cc/t/nspanel-pro-v4-4-0-officially-released-new-features-enhancements/207640/18 "2026-02-24T06:29:20Z")
Hi, you can obtain the latest version through this beta application tool. > **[NSPanel Pro Beta Testing Program](https://panel.sonoff.tech/nspanel-pro/beta-test/#/login)** ---
**Author:** ![Milk](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/milk/32/8679_2.png) [@Milk](https://forum.ewelink.cc/u/Milk)\ **Post date:** [February 24, 2026, 7:15am UTC](https://forum.ewelink.cc/t/nspanel-pro-v4-4-0-officially-released-new-features-enhancements/207640/19 "2026-02-24T07:15:27Z")
I understand your usage scenario. However, the proximity sensor currently used by NSPanelPro reports changes only when an object approaches, but it does not report the specific distance. Therefore, for now, it is not possible to restrict this function based on distance. ---
**Author:** ![Milk](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/milk/32/8679_2.png) [@Milk](https://forum.ewelink.cc/u/Milk)\ **Post date:** [February 24, 2026, 9:10am UTC](https://forum.ewelink.cc/t/nspanel-pro-v4-4-0-officially-released-new-features-enhancements/207640/20 "2026-02-24T09:10:57Z")
@chriss2 @Radaristanbul @danielk117 @Stophammer @derPate1989 Thank you for your feedback. This is indeed an issue (it may have been overlooked during development due to the noisy office environment). We plan to optimize it in the next version of NSPanelPro. As @danielk117 mentioned, for now, you can go to Settings \> Advanced Settings \> Sound \> Touch Sounds to disable it and resolve the issue.Thank you for the suggested solution. [Next page](https://forum.ewelink.cc/t/nspanel-pro-v4-4-0-officially-released-new-features-enhancements/207640.md?page=2)