# NSPanel Pro as NSPanel remote termostat **URL:** \ **Category:** Ideas & Suggestion\ **Tags:** advanced-plan\ **Created:** [January 12, 2023, 6:57pm UTC](https://forum.ewelink.cc/t/nspanel-pro-as-nspanel-remote-termostat/12024 "2023-01-12T18:57:25Z")\ **Posts on this page:** 14\ **Page:** 1
**Author:** ![matraiimi](https://avatars.discourse-cdn.com/v4/letter/m/ecae2f/32.png) [@matraiimi](https://forum.ewelink.cc/u/matraiimi)\ **Post date:** [January 12, 2023, 6:57pm UTC](https://forum.ewelink.cc/t/nspanel-pro-as-nspanel-remote-termostat/12024/1 "2023-01-12T18:57:25Z")
Dear Support, I have a simple NSPanel that controls the heating. I also bought an NSPanel Pro to control the heating from upstairs as second zone. Unfortunately, the “control” of the simple NSPanel thermostat doesn’t work as I expected… ☹ It can only be set as a thermometer (NSpanel internal or external sensor set on it), as a sensor and the controlled switch must also be selected. So it’s not what I expected, because I can set the opposite target temperature, which fools the switch that turns on the gas heater… In my interpretation, the “treatment” would have been that the value set on the pro is also set on the plain NSPanel (as if you set it in the app, it is also set on the panel)! Is this possible in the future? Best regards, Imre ---
**Author:** ![yitie](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/yitie/32/3613_2.png) [@yitie](https://forum.ewelink.cc/u/yitie)\ **Post date:** [February 1, 2023, 2:11am UTC](https://forum.ewelink.cc/t/nspanel-pro-as-nspanel-remote-termostat/12024/2 "2023-02-01T02:11:43Z")
I’d like to info @Daniel_Zhan from SONOFF team to evaluate. ---
**Author:** ![Daniel\_Zhan](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/daniel_zhan/32/622_2.png) [@Daniel\_Zhan](https://forum.ewelink.cc/u/Daniel_Zhan)\ **Post date:** [February 6, 2023, 3:39am UTC](https://forum.ewelink.cc/t/nspanel-pro-as-nspanel-remote-termostat/12024/3 "2023-02-06T03:39:38Z")
@matraiimi Your request is interesting, we will evaluate how to implement it better. ---
**Author:** ![eneagud](https://avatars.discourse-cdn.com/v4/letter/e/bcef8e/32.png) [@eneagud](https://forum.ewelink.cc/u/eneagud)\ **Post date:** [April 17, 2023, 1:09pm UTC](https://forum.ewelink.cc/t/nspanel-pro-as-nspanel-remote-termostat/12024/4 "2023-04-17T13:09:42Z")
Is it possible to lower the minimum temperature? I am trying to reduce the temperature to 7 degrees and it’s not possible below 16. ---
**Author:** ![matraiimi](https://avatars.discourse-cdn.com/v4/letter/m/ecae2f/32.png) [@matraiimi](https://forum.ewelink.cc/u/matraiimi)\ **Post date:** [May 3, 2023, 6:36am UTC](https://forum.ewelink.cc/t/nspanel-pro-as-nspanel-remote-termostat/12024/5 "2023-05-03T06:36:22Z")
Hi, Can you inform me about state ? Best regards Imre ---
**Author:** ![ociepa.ekotox](https://avatars.discourse-cdn.com/v4/letter/o/c68b51/32.png) [@ociepa.ekotox](https://forum.ewelink.cc/u/ociepa.ekotox)\ **Post date:** [June 25, 2023, 9:50am UTC](https://forum.ewelink.cc/t/nspanel-pro-as-nspanel-remote-termostat/12024/6 "2023-06-25T09:50:14Z")
Hello. increase the range of the NSPANEL PRO thermostat (e.g. -20°C to +100°C) and add hysteresis (0.2 °C). I would like to use NSPANEL PRO to control the temperature of the freezer and water heater. Regards ---
**Author:** ![matraiimi](https://avatars.discourse-cdn.com/v4/letter/m/ecae2f/32.png) [@matraiimi](https://forum.ewelink.cc/u/matraiimi)\ **Post date:** [September 11, 2023, 4:48am UTC](https://forum.ewelink.cc/t/nspanel-pro-as-nspanel-remote-termostat/12024/7 "2023-09-11T04:48:40Z")
Hi guys! This is task is actually again, because here is the winter! Can you priority this task? Regards Imre ---
**Author:** ![ociepa.ekotox](https://avatars.discourse-cdn.com/v4/letter/o/c68b51/32.png) [@ociepa.ekotox](https://forum.ewelink.cc/u/ociepa.ekotox)\ **Post date:** [September 14, 2023, 8:27pm UTC](https://forum.ewelink.cc/t/nspanel-pro-as-nspanel-remote-termostat/12024/8 "2023-09-14T20:27:42Z")
Hi. [Daniel\_Zhan](https://forum.ewelink.cc/u/Daniel_Zhan), [yitie](https://forum.ewelink.cc/u/yitie) "On Firmware V 2.0 released yesterday (NSPannel Pro), the changelog is saing: _Thermostat function optimization. Improved temperature control accuracy, the minimum adjustable unit is **0.5** ; added ‘+’ and ‘-’ buttons; optimized thermostat interface_" Changes are necessary in the ewelink application Increase the range of NSPANEL PRO thermostat? (e.g. -20°C to +100°C) and add hysteresis ( 0.2°C ). I would like to use NSPANEL PRO in automatic mode to control the temperature of the freezer and water heater ![termostat nspanel pro](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/2/25f09d43789bc6218287cc5dcb4fa2ba3431b25f.jpeg) ---
**Author:** ![laurentiu.vasile01](https://avatars.discourse-cdn.com/v4/letter/l/958977/32.png) [@laurentiu.vasile01](https://forum.ewelink.cc/u/laurentiu.vasile01)\ **Post date:** [October 4, 2023, 9:17pm UTC](https://forum.ewelink.cc/t/nspanel-pro-as-nspanel-remote-termostat/12024/9 "2023-10-04T21:17:50Z")
So, can histeresis be set to 0.1 degrees? If yes i need 400 pz. ---
**Author:** ![matraiimi](https://avatars.discourse-cdn.com/v4/letter/m/ecae2f/32.png) [@matraiimi](https://forum.ewelink.cc/u/matraiimi)\ **Post date:** [October 7, 2023, 6:05am UTC](https://forum.ewelink.cc/t/nspanel-pro-as-nspanel-remote-termostat/12024/10 "2023-10-07T06:05:29Z")
Hi guys, Have you thought about introducing this function? Or shouldn’t we wait because it won’t happen… it’s a joke that two devices with the same function (NSPanel and NSPanel Pro) cannot communicate with each other… regards Imre ---
**Author:** ![tarhos104](https://avatars.discourse-cdn.com/v4/letter/t/57b2e6/32.png) [@tarhos104](https://forum.ewelink.cc/u/tarhos104)\ **Post date:** [November 19, 2023, 10:33am UTC](https://forum.ewelink.cc/t/nspanel-pro-as-nspanel-remote-termostat/12024/11 "2023-11-19T10:33:11Z")
Hello Daniel! Can the Nspanel Pro hysteresis to be set to for exampe 0.2°C? 1 °C is too much to use this as a well working thermostat. Thanks, Bence ---
**Author:** ![sintoxx](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/sintoxx/32/3644_2.png) [@sintoxx](https://forum.ewelink.cc/u/sintoxx)\ **Post date:** [November 23, 2023, 12:13am UTC](https://forum.ewelink.cc/t/nspanel-pro-as-nspanel-remote-termostat/12024/12 "2023-11-23T00:13:13Z")
I also have an NS Panel and I expected more from it to be able to use it as a thermostat, but as of today it has not been improved, I hope they fix that and that it is compatible with sonoff ihost to be able to use it as a thermostat, because the synchronization with ewelink It is only for the lamp ignition channels. ---
**Author:** ![aron](https://avatars.discourse-cdn.com/v4/letter/a/ba9def/32.png) [@aron](https://forum.ewelink.cc/u/aron)\ **Post date:** [January 12, 2024, 10:43am UTC](https://forum.ewelink.cc/t/nspanel-pro-as-nspanel-remote-termostat/12024/13 "2024-01-12T10:43:11Z")
Is it possible increase the range thermostat form 16°C-31°C to e.g. -20°C to +100°C We need a controller like this for garden saunas [https://forum.ewelink.cc/t/increase-the-range-of-the-nspanel-pro-thermostat-e-g-20-c-to-100-c/26955/4](https://forum.ewelink.cc/t/increase-the-range-of-the-nspanel-pro-thermostat-e-g-20-c-to-100-c/26955/4) ---
**Author:** ![ociepa.ekotox](https://avatars.discourse-cdn.com/v4/letter/o/c68b51/32.png) [@ociepa.ekotox](https://forum.ewelink.cc/u/ociepa.ekotox)\ **Post date:** [March 15, 2025, 12:37am UTC](https://forum.ewelink.cc/t/nspanel-pro-as-nspanel-remote-termostat/12024/14 "2025-03-15T00:37:11Z")
> [@ociepa.ekotox](#): > > Changes are necessary in the ewelink application > > Increase the range of NSPANEL PRO thermostat? (e.g. -20°C to +100°C) and add hysteresis ( 0.2°C ). > I would like to use NSPANEL PRO in automatic mode to control the temperature of the freezer and water heater > > ![termostat nspanel pro](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/2/25f09d43789bc6218287cc5dcb4fa2ba3431b25f.jpeg) Hi @Daniel_Zhan Changes are needed in the Thermostat Function in NSPANEL PRO. The measurement range of the NSPANEL PRO thermostat should be increased (e.g. -20°C to +100°C) and hysteresis (0.2°C) should be added. The current measurement range (from 4 to 40 \*C and hysteresis 0.5 \*C) is not enough. We have been waiting for this update for a very long time.