# NSPanel Pro 120 - Ver. 4.0.4 Zigbee Devices Issues **URL:** \ **Category:** NSPanel Pro\ **Created:** [October 6, 2025, 10:26am UTC](https://forum.ewelink.cc/t/nspanel-pro-120-ver-4-0-4-zigbee-devices-issues/205954 "2025-10-06T10:26:15Z")\ **Posts on this page:** 6\ **Page:** 2
**Author:** ![MichaelLearnsToCode](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/michaellearnstocode/32/1668_2.png) [@MichaelLearnsToCode](https://forum.ewelink.cc/u/MichaelLearnsToCode)\ **Post date:** [November 3, 2025, 2:59pm UTC](https://forum.ewelink.cc/t/nspanel-pro-120-ver-4-0-4-zigbee-devices-issues/205954/24 "2025-11-03T14:59:12Z")
> Unfortunately, I’m getting the “insufficient disk space” message. Sorry for the issue. Please refer to [NSPanel Pro V4.0.12 impossible to complete update - #3 by MichaelLearnsToCode](https://forum.ewelink.cc/t/nspanel-pro-v4-0-12-impossible-to-complete-update/206373/3) for possible solutions. ---
**Author:** ![kwet](https://avatars.discourse-cdn.com/v4/letter/k/898d66/32.png) [@kwet](https://forum.ewelink.cc/u/kwet)\ **Post date:** [November 3, 2025, 3:16pm UTC](https://forum.ewelink.cc/t/nspanel-pro-120-ver-4-0-4-zigbee-devices-issues/205954/25 "2025-11-03T15:16:17Z")
Yes it’s ok now 👍 ---
**Author:** ![vodkon](https://avatars.discourse-cdn.com/v4/letter/v/e56c9b/32.png) [@vodkon](https://forum.ewelink.cc/u/vodkon)\ **Post date:** [December 15, 2025, 7:51pm UTC](https://forum.ewelink.cc/t/nspanel-pro-120-ver-4-0-4-zigbee-devices-issues/205954/26 "2025-12-15T19:51:56Z")
I have an nspanel pro, but the connection to the zigbee bridge pro gateway doesn’t work. I bought two nspanels to act as a router and a wall panel to control devices. Now remote zigbee devices have no connection because the nspanel doesn’t work in router mode. ---
**Author:** ![MichaelLearnsToCode](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/michaellearnstocode/32/1668_2.png) [@MichaelLearnsToCode](https://forum.ewelink.cc/u/MichaelLearnsToCode)\ **Post date:** [December 16, 2025, 3:41am UTC](https://forum.ewelink.cc/t/nspanel-pro-120-ver-4-0-4-zigbee-devices-issues/205954/29 "2025-12-16T03:41:23Z")
Sorry for the issue. Is your NSPanel Pro running on `v4.1.5` or `v4.2.0` firmware? If not, could you please update NSPanel Pro to the latest firmware first? Don’t worry, Zigbee Router Mode does work on NSPanel Pro. If you encounter any issue, we are here to help. ---
**Author:** ![vodkon](https://avatars.discourse-cdn.com/v4/letter/v/e56c9b/32.png) [@vodkon](https://forum.ewelink.cc/u/vodkon)\ **Post date:** [December 16, 2025, 4:45am UTC](https://forum.ewelink.cc/t/nspanel-pro-120-ver-4-0-4-zigbee-devices-issues/205954/30 "2025-12-16T04:45:26Z")
I’m currently using 4.2.0. It didn’t work on version 4.1.5 either, so I signed up for the beta version, but to no avail. All three nspanels don’t work with the latest Sonoff ZigBee Bridge Pro version 2.8.0 (ZBBridge-P). They don’t extend the range, can’t pair, and don’t appear in the app as a ZigBee router (I remember that nspanel used to be listed as a router in the eWeLink device list). I should add that one of the nspanels is 3 meters away from the gateway, so the problem is only with the software). ---
**Author:** ![Milk](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/milk/32/8679_2.png) [@Milk](https://forum.ewelink.cc/u/Milk)\ **Post date:** [December 16, 2025, 10:26am UTC](https://forum.ewelink.cc/t/nspanel-pro-120-ver-4-0-4-zigbee-devices-issues/205954/31 "2025-12-16T10:26:49Z")
Hi, we sincerely apologize for this issue. Based on your description, our team has been able to reproduce the problem. We are currently investigating the root cause and will prioritize a fix as soon as it is identified. Thank you for your patience and understanding. [Previous page](https://forum.ewelink.cc/t/nspanel-pro-120-ver-4-0-4-zigbee-devices-issues/205954.md?page=1)