# NS PANEL thermostat accuracy

**URL:** <https://forum.ewelink.cc/t/ns-panel-thermostat-accuracy/14535>\
**Category:** Uncategorized\
**Created:** [March 2, 2023, 8:05am UTC](https://forum.ewelink.cc/t/ns-panel-thermostat-accuracy/14535 "2023-03-02T08:05:04Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![matthewnmoore](https://avatars.discourse-cdn.com/v4/letter/m/73ab20/32.png) [@matthewnmoore](https://forum.ewelink.cc/u/matthewnmoore)\
**Post date:** [March 2, 2023, 8:05am UTC](https://forum.ewelink.cc/t/ns-panel-thermostat-accuracy/14535/1 "2023-03-02T08:05:04Z")

</div>

Hi. I have been using the NSpanels as room thermostat but find they are not accurate enough. Is it possible to add a +/- 0 to the adjustment menu? Also, in the UK our thermostats have ‘chronic logic’. They monitor the temperature and anticipate the demand, giving a much more even heat. Is this something you could look into?

---

<div class="post-metadata">

**Author:** ![debreczeni1996](https://avatars.discourse-cdn.com/v4/letter/d/d26b3c/32.png) [@debreczeni1996](https://forum.ewelink.cc/u/debreczeni1996)\
**Post date:** [March 4, 2023, 7:48pm UTC](https://forum.ewelink.cc/t/ns-panel-thermostat-accuracy/14535/2 "2023-03-04T19:48:34Z")

</div>

Make the thermostat function usable please for fu\*\* sake

---

<div class="post-metadata">

**Author:** ![matthewnmoore](https://avatars.discourse-cdn.com/v4/letter/m/73ab20/32.png) [@matthewnmoore](https://forum.ewelink.cc/u/matthewnmoore)\
**Post date:** [March 16, 2023, 9:19am UTC](https://forum.ewelink.cc/t/ns-panel-thermostat-accuracy/14535/3 "2023-03-16T09:19:33Z")

</div>

Any news on this please?

---

<div class="post-metadata">

**Author:** ![matthewnmoore](https://avatars.discourse-cdn.com/v4/letter/m/73ab20/32.png) [@matthewnmoore](https://forum.ewelink.cc/u/matthewnmoore)\
**Post date:** [April 2, 2023, 8:12am UTC](https://forum.ewelink.cc/t/ns-panel-thermostat-accuracy/14535/4 "2023-04-02T08:12:00Z")

</div>

Can I ask if anyone at eWeLink have looked at this yet? Is it possible to change the accuracy of the NS Panel to +- 0 to make it more accurate?

---

<div class="post-metadata">

**Author:** ![eerke](https://avatars.discourse-cdn.com/v4/letter/e/eb9ed0/32.png) [@eerke](https://forum.ewelink.cc/u/eerke)\
**Post date:** [April 2, 2023, 9:56am UTC](https://forum.ewelink.cc/t/ns-panel-thermostat-accuracy/14535/5 "2023-04-02T09:56:48Z")

</div>

I suspect they don’t understand you because I live in the U.K. and don’t.

Do you mean the built-in temperature sensor? Because in the settings there is a calibration setting for that one. Mine is stuck at -25°C And the calibration is limited to + or - 10°C. I have asked a few times why it is stuck at -25°C but have almost given up. It can also display the temperature from TH and Zigbee Temp sensors but I don’t think they have the calibration function.

The Zigbee temperature sensors seem the best to me, although require a hub for the non-pro version. Was never very impressed with the built on sensor even when it worked.

---

<div class="post-metadata">

**Author:** ![matthewnmoore](https://avatars.discourse-cdn.com/v4/letter/m/73ab20/32.png) [@matthewnmoore](https://forum.ewelink.cc/u/matthewnmoore)\
**Post date:** [April 2, 2023, 11:14am UTC](https://forum.ewelink.cc/t/ns-panel-thermostat-accuracy/14535/6 "2023-04-02T11:14:30Z")

</div>

The finest adjustment is +-1 which means the accuracy for 22 degrees will be 21-23 which is not accurate enough. I want it +-0 which will give it greater accuracy.