# NS panel pro - zigbee devices **URL:** https://forum.ewelink.cc/t/ns-panel-pro-zigbee-devices/205832 **Category:** NSPanel Pro **Tags:** zigbee, nspanel, ihost **Created:** [September 24, 2025, 8:46pm UTC](https://forum.ewelink.cc/t/ns-panel-pro-zigbee-devices/205832 "2025-09-24T20:46:37Z") **Posts on this page:** 1 **Showing post:** 5
### Author: ![ociepa.ekotox](https://avatars.discourse-cdn.com/v4/letter/o/c68b51/32.png) [@ociepa.ekotox](https://forum.ewelink.cc/u/ociepa.ekotox) #### Post date: [September 25, 2025, 9:02am UTC](https://forum.ewelink.cc/t/ns-panel-pro-zigbee-devices/205832/5 "2025-09-25T09:02:47Z")
@bustavin Why don’t you add all your Zigbee devices to ihost. Then send them through Matter Bridge to NSPanel Pro. Paral-sync is an old add-on that is no longer being developed. This topic was discussed a long time ago. > [@Getting Started: Add Your Devices into Apple Home with CUBE OS Matter Bridge](https://forum.ewelink.cc/t/getting-started-add-your-devices-into-apple-home-with-cube-os-matter-bridge/205665): > > Hi everyone waving_hand With CUBE OS and its built-in Matter Bridge, you can now bring your eWeLink LAN devices, Zigbee devices, and more into Apple Home. This gives many older WiFi devices a second life - they can now join ecosystems like Apple Home without relying on the eWeLink cloud, and be controlled through Apple Home, Siri, HomePod, Apple Watch, and other Apple ecosystem entry points. We’ve created this thread as a master post to guide you through the setup process and share device-sp… you will do the same in ihost, but for ewelink nspanel pro. --- _[View the full topic](https://forum.ewelink.cc/t/ns-panel-pro-zigbee-devices/205832)._