# NS Panel Pro Thermostat problems

**URL:** <https://forum.ewelink.cc/t/ns-panel-pro-thermostat-problems/27834>\
**Category:** NSPanel Pro\
**Tags:** nspanel\
**Created:** [January 30, 2024, 2:37pm UTC](https://forum.ewelink.cc/t/ns-panel-pro-thermostat-problems/27834 "2024-01-30T14:37:38Z")\
**Posts on this page:** 1\
**Showing post:** 127

<div class="post-metadata">

**Author:** ![demonizator](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/demonizator/32/8590_2.png) [@demonizator](https://forum.ewelink.cc/u/demonizator)\
**Post date:** [December 9, 2025, 9:29am UTC](https://forum.ewelink.cc/t/ns-panel-pro-thermostat-problems/27834/127 "2025-12-09T09:29:03Z")

</div>

> [@MichaelLearnsToCode](#):
>
> We will optimize existing `Single Room Heating` solution after we release `Central Heating` solution. The current `Single Room Heating` solution uses the same underlying technology as `Scene` which is not optimal.

Will this allow us to pair a single SNZB-02P with a single TRVZB as a thermostat? I installed two TRVZB devices yesterday, and aside from the scheduling issue ([TRVZB schedules not working](https://forum.ewelink.cc/t/trvzb-schedules-not-working/206851)), I also noticed that I can’t assign the TRVZB as an `Actuator` in either the NSPanel Pro’s `Thermostat` interface or the `Thermo Plugin` in eWeLink. I assume this might be by design since the TRVZB widget does the same, but it would be great if even this simple setup could benefit from the improved UI and dedicated full-screen page for `Thermostat` on the NSPanel Pro.

For context: We live in a large apartment with five heated rooms. The building is supplied by a centralized district heating system, and each room in every apartment simply has a radiator with its own valve. I believe this would fall under `Single Room Heating`. Where I live, this type of heating setup is very common.

---

_[View the full topic](https://forum.ewelink.cc/t/ns-panel-pro-thermostat-problems/27834)._