# Multiple Time of Day Conditions

**URL:** <https://forum.ewelink.cc/t/multiple-time-of-day-conditions/15370>\
**Category:** Ideas & Suggestion\
**Tags:** scene\
**Created:** [March 17, 2023, 12:30pm UTC](https://forum.ewelink.cc/t/multiple-time-of-day-conditions/15370 "2023-03-17T12:30:39Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Meyer.Stiglingh](https://avatars.discourse-cdn.com/v4/letter/m/919ad9/32.png) [@Meyer.Stiglingh](https://forum.ewelink.cc/u/Meyer.Stiglingh)\
**Post date:** [March 17, 2023, 12:30pm UTC](https://forum.ewelink.cc/t/multiple-time-of-day-conditions/15370/1 "2023-03-17T12:30:39Z")

</div>

Would it be possible to add the ability to add multiple time of day conditions on single scene?

Currently I have to create multiple scenes in order to make sure a device is either on or off as below.

 ![image](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/b/bdccc8bf84b75a49f8d512cde90fe6daf2cd052f.png)

For additional clarity the failure to switch on or off is not due to the device but due to Loadshedding(power cuts)

---

<div class="post-metadata">

**Author:** ![StephenJ](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/stephenj/32/3311_2.png) [@StephenJ](https://forum.ewelink.cc/u/StephenJ)\
**Post date:** [March 22, 2023, 3:24am UTC](https://forum.ewelink.cc/t/multiple-time-of-day-conditions/15370/2 "2023-03-22T03:24:18Z")

</div>

Hi there, could you provide me with an example?

---

<div class="post-metadata">

**Author:** ![Meyer.Stiglingh](https://avatars.discourse-cdn.com/v4/letter/m/919ad9/32.png) [@Meyer.Stiglingh](https://forum.ewelink.cc/u/Meyer.Stiglingh)\
**Post date:** [March 22, 2023, 5:36am UTC](https://forum.ewelink.cc/t/multiple-time-of-day-conditions/15370/3 "2023-03-22T05:36:39Z")

</div>

Here is the scenario,

I have my geyser switch on at 3am and off at 5am . If we have power cuts from 2am-4am I mis the on scene and thus have a cold shower, If we have power cuts from 4am-6am I miss the off scene and thus use way more electricity than intended. What I have now done is create an on scene for 3am and an off scene for 5am. Additionally I had to create an on scene for 4am and off scene for 6am.

Ideally I would have like to create one on scene to trigger at 3 am and 4am and one off scene to trigger at 5am and 6am.

So sure i have a workaround but my scene list is getting long and confusing.