# Missing Sensors Features with ZBBridge Ultra Matter on Home Assistant

**URL:** <https://forum.ewelink.cc/t/missing-sensors-features-with-zbbridge-ultra-matter-on-home-assistant/47235>\
**Category:** Ideas & Suggestion\
**Created:** [August 19, 2024, 10:55am UTC](https://forum.ewelink.cc/t/missing-sensors-features-with-zbbridge-ultra-matter-on-home-assistant/47235 "2024-08-19T10:55:20Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Albin](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/albin/32/5530_2.png) [@Albin](https://forum.ewelink.cc/u/Albin)\
**Post date:** [August 19, 2024, 10:55am UTC](https://forum.ewelink.cc/t/missing-sensors-features-with-zbbridge-ultra-matter-on-home-assistant/47235/1 "2024-08-19T10:55:20Z")

</div>

Hi, I have ZBbridge U connected to Home Assistant through Matter.  
The sensors of each device are motion only (SNZB-06 or-03). Is there going to be an update that has all the sensors, such as light level?  
I update a couple of images of that

 ![hub](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/6/699e397548abbea60825c95687062de6665d5bfb.jpeg)  
 ![matter](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/d/d550bc7ebc3067447185fbdbc6c9857637580b8f.jpeg)  
 ![sensors](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/2/29c19d8396716a4c949505358d1cfeff80a2261d.jpeg)

---

<div class="post-metadata">

**Author:** ![Unnamedi](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/unnamedi/32/5677_2.png) [@Unnamedi](https://forum.ewelink.cc/u/Unnamedi)\
**Post date:** [August 19, 2024, 3:04pm UTC](https://forum.ewelink.cc/t/missing-sensors-features-with-zbbridge-ultra-matter-on-home-assistant/47235/2 "2024-08-19T15:04:03Z")

</div>

As far as I know the version of the Matter protocol used by sonoff does not yet have the light information.  
You would have to wait for the protocol update.

Nowadays what I use the most up-to-date version is Home Assistant.  
That uses 1.3 VI that Samsung requested certification for the same version these days and Apple as well.

Google and Amazon use 1.1 or 1.0 the same used by Sonoff.

I may be wrong, but @ward can help resolve that doubt.

---

<div class="post-metadata">

**Author:** ![ociepa.ekotox](https://avatars.discourse-cdn.com/v4/letter/o/c68b51/32.png) [@ociepa.ekotox](https://forum.ewelink.cc/u/ociepa.ekotox)\
**Post date:** [August 19, 2024, 7:57pm UTC](https://forum.ewelink.cc/t/missing-sensors-features-with-zbbridge-ultra-matter-on-home-assistant/47235/3 "2024-08-19T19:57:32Z")

</div>

brightness is already supported in matter sdk 1.0. but ewelink can’t do it yet.

---

<div class="post-metadata">

**Author:** ![ward](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/ward/32/10437_2.png) [@ward](https://forum.ewelink.cc/u/ward)\
**Post date:** [August 20, 2024, 2:47am UTC](https://forum.ewelink.cc/t/missing-sensors-features-with-zbbridge-ultra-matter-on-home-assistant/47235/4 "2024-08-20T02:47:14Z")

</div>

> [@Unnamedi](#):
>
> Google and Amazon use 1.1 or 1.0 the same used by Sonoff.

Integrating specific Matter versions doesn’t mean all features will be supported for all vendors.

As for **illumination/light sensors on eWeLink** , we are still in the early phase and can not share much for now.

For Matter support and the Bridge Ultra/06P, 03P features, I’m pinging SONOFF for attention. @Daniel_Zhan