# Mini curtain zigbee module **URL:** \ **Category:** eWeLink Plans\ **Created:** [November 23, 2023, 7:38pm UTC](https://forum.ewelink.cc/t/mini-curtain-zigbee-module/24865 "2023-11-23T19:38:19Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![av.videosat](https://avatars.discourse-cdn.com/v4/letter/a/df788c/32.png) [@av.videosat](https://forum.ewelink.cc/u/av.videosat)\ **Post date:** [November 23, 2023, 7:38pm UTC](https://forum.ewelink.cc/t/mini-curtain-zigbee-module/24865/1 "2023-11-23T19:38:19Z")
I added a zigbee curtain module to ihost but I can’t get an option to calibrate it. Any tips? Factory\_TZ3210\_w5ojgcvy ---
**Author:** ![yorgun](https://avatars.discourse-cdn.com/v4/letter/y/c6cbf5/32.png) [@yorgun](https://forum.ewelink.cc/u/yorgun)\ **Post date:** [January 6, 2024, 12:20pm UTC](https://forum.ewelink.cc/t/mini-curtain-zigbee-module/24865/2 "2024-01-06T12:20:46Z")
I have same question, can control open close stop but cant calibrate. Normally on ZHA i calibrate with clusters. ---
**Author:** ![av.videosat](https://avatars.discourse-cdn.com/v4/letter/a/df788c/32.png) [@av.videosat](https://forum.ewelink.cc/u/av.videosat)\ **Post date:** [January 10, 2024, 12:48pm UTC](https://forum.ewelink.cc/t/mini-curtain-zigbee-module/24865/3 "2024-01-10T12:48:23Z")
Try this: 1 - you can calibrate it in the Tuya/Smart Life app. 2 - Delete the device from the Tuya/Smart Life app. 3 - Register the device on Ihost. I got it this way ---
**Author:** ![yorgun](https://avatars.discourse-cdn.com/v4/letter/y/c6cbf5/32.png) [@yorgun](https://forum.ewelink.cc/u/yorgun)\ **Post date:** [January 11, 2024, 8:20am UTC](https://forum.ewelink.cc/t/mini-curtain-zigbee-module/24865/4 "2024-01-11T08:20:02Z")
Thank you brother, we can use this method until they can support.