# Make Sonoff and Netatmo talk!

**URL:** <https://forum.ewelink.cc/t/make-sonoff-and-netatmo-talk/85698>\
**Category:** Free discussion\
**Created:** [November 9, 2024, 10:05am UTC](https://forum.ewelink.cc/t/make-sonoff-and-netatmo-talk/85698 "2024-11-09T10:05:27Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![fabrizio](https://avatars.discourse-cdn.com/v4/letter/f/8dc957/32.png) [@fabrizio](https://forum.ewelink.cc/u/fabrizio)\
**Post date:** [November 9, 2024, 10:05am UTC](https://forum.ewelink.cc/t/make-sonoff-and-netatmo-talk/85698/1 "2024-11-09T10:05:27Z")

</div>

Hi All,  
I have an heater managed by Netatmo that turns on and off with its relay, but I would like to use a ZBMINI to control the heater, but keeping Netatmo as a thermostat to manage the programming. So the ZBMINI should receive the on and off commands from Netatmo. Do you think it is possible?  
Thank you in advance!  
Fabry

---

<div class="post-metadata">

**Author:** ![ward](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/ward/32/10437_2.png) [@ward](https://forum.ewelink.cc/u/ward)\
**Post date:** [November 12, 2024, 2:42am UTC](https://forum.ewelink.cc/t/make-sonoff-and-netatmo-talk/85698/2 "2024-11-12T02:42:32Z")

</div>

> [@fabrizio](#):
>
> Netatmo

Does Netatmo do on/off action to the circuit - like an emulated rocker switch? If so connect to the S1/S2 com should send the message to eWeLink and ZBMINI.

---

<div class="post-metadata">

**Author:** ![fabrizio](https://avatars.discourse-cdn.com/v4/letter/f/8dc957/32.png) [@fabrizio](https://forum.ewelink.cc/u/fabrizio)\
**Post date:** [November 12, 2024, 4:50pm UTC](https://forum.ewelink.cc/t/make-sonoff-and-netatmo-talk/85698/3 "2024-11-12T16:50:25Z")

</div>

Hi Ward,  
yes Netatmo act like a relay with dry contact, doing ON/OFF.  
But if move the Netatmo contact to S1 - S2 of ZBMINI, I will miss the dry contact to turn ON/OFF the heater.  
Thank you  
Fabrizio