# M515EGZT motor Curtain **URL:** \ **Category:** eWeLink CUBE\ **Created:** [January 17, 2024, 11:53pm UTC](https://forum.ewelink.cc/t/m515egzt-motor-curtain/27245 "2024-01-17T23:53:54Z")\ **Posts on this page:** 12\ **Page:** 1
**Author:** ![y20.reg](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/y20.reg/32/3655_2.png) [@y20.reg](https://forum.ewelink.cc/u/y20.reg)\ **Post date:** [January 17, 2024, 11:53pm UTC](https://forum.ewelink.cc/t/m515egzt-motor-curtain/27245/1 "2024-01-17T23:53:54Z")
good day, I have a Tuya M515EGZT curtain motor, in the compatibility list it says “motor-control+percentage” however my device is detected as contact switch Device ID 60a423fffe6cc2a0 Manufacturer \_TZE200\_nueqqe6k Outlet ![motor_curt](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/e/efb4e9b299daec332222e8970965498b280cb9f8.jpeg) I don’t really understand what the issue is and how to deal with it, could someone help? ---
**Author:** ![ward](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/ward/32/10437_2.png) [@ward](https://forum.ewelink.cc/u/ward)\ **Post date:** [January 18, 2024, 1:38am UTC](https://forum.ewelink.cc/t/m515egzt-motor-curtain/27245/2 "2024-01-18T01:38:16Z")
Hi y20.reg, Thanks for your kind feedback. We have identified the issue you mentioned and are actively working on a solution. The fix will be implemented in the upcoming versions. Best regards, Ward ---
**Author:** ![y20.reg](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/y20.reg/32/3655_2.png) [@y20.reg](https://forum.ewelink.cc/u/y20.reg)\ **Post date:** [February 7, 2024, 12:37pm UTC](https://forum.ewelink.cc/t/m515egzt-motor-curtain/27245/3 "2024-02-07T12:37:08Z")
have already been released two updates, but the curtain motor is still recognized as a socket :/. ---
**Author:** ![y20.reg](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/y20.reg/32/3655_2.png) [@y20.reg](https://forum.ewelink.cc/u/y20.reg)\ **Post date:** [February 27, 2024, 12:52pm UTC](https://forum.ewelink.cc/t/m515egzt-motor-curtain/27245/4 "2024-02-27T12:52:01Z")
Is something being done in this direction? ---
**Author:** ![ward](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/ward/32/10437_2.png) [@ward](https://forum.ewelink.cc/u/ward)\ **Post date:** [February 28, 2024, 2:14am UTC](https://forum.ewelink.cc/t/m515egzt-motor-curtain/27245/5 "2024-02-28T02:14:19Z")
Hi, The Zigbee2CUBE addon will handle the device in the coming version (ETA earlier next week). Could you please try to re-pair the device when 1.13.4 is released? ---
**Author:** ![y20.reg](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/y20.reg/32/3655_2.png) [@y20.reg](https://forum.ewelink.cc/u/y20.reg)\ **Post date:** [February 28, 2024, 9:56am UTC](https://forum.ewelink.cc/t/m515egzt-motor-curtain/27245/6 "2024-02-28T09:56:06Z")
ofc, i’ll try. ---
**Author:** ![y20.reg](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/y20.reg/32/3655_2.png) [@y20.reg](https://forum.ewelink.cc/u/y20.reg)\ **Post date:** [March 8, 2024, 10:36pm UTC](https://forum.ewelink.cc/t/m515egzt-motor-curtain/27245/7 "2024-03-08T22:36:29Z")
on firmware 1.13.4, device works fine 🙂 ---
**Author:** ![ward](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/ward/32/10437_2.png) [@ward](https://forum.ewelink.cc/u/ward)\ **Post date:** [March 10, 2024, 5:42pm UTC](https://forum.ewelink.cc/t/m515egzt-motor-curtain/27245/8 "2024-03-10T17:42:50Z")
glad it worked 😃 ---
**Author:** ![y20.reg](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/y20.reg/32/3655_2.png) [@y20.reg](https://forum.ewelink.cc/u/y20.reg)\ **Post date:** [June 2, 2024, 9:48pm UTC](https://forum.ewelink.cc/t/m515egzt-motor-curtain/27245/9 "2024-06-02T21:48:37Z")
However, I don’t know how to set the start and end position of the blind ---
**Author:** ![ward](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/ward/32/10437_2.png) [@ward](https://forum.ewelink.cc/u/ward)\ **Post date:** [June 3, 2024, 7:45am UTC](https://forum.ewelink.cc/t/m515egzt-motor-curtain/27245/10 "2024-06-03T07:45:16Z")
Hey, That’s not supported yet from iHost UI. it could work in the upcoming update this month, but I can not guarantee this as we currently don’t have a sample to test with. I noticed it has a remote. Can you use that to set the position? ---
**Author:** ![y20.reg](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/y20.reg/32/3655_2.png) [@y20.reg](https://forum.ewelink.cc/u/y20.reg)\ **Post date:** [June 3, 2024, 8:11pm UTC](https://forum.ewelink.cc/t/m515egzt-motor-curtain/27245/11 "2024-06-03T20:11:09Z")
in the roller shutter device (independently of the ihost) I can set several positions, for example, when the roller shutter is fully open after pressing the “down” button it will close halfway (because I added such a position when programming the roller shutter itself) The problem is that if I set (after triggering) “Close roller shutter” in the scene, the roller shutter closes only halfway (that is, to the position I set) and it should close fully, regardless of the internal setting of the device (roller shutter). Also, I can’t set the closing percentage because it gets the percentage slider disabled and below that it says “First set the limit position using the remote control.” Yes I can use the remote control to set the position, unfortunately I don’t know how to do it. when I enter the device, then clicking or moving the slider to “fully open” or “fully closed” works just fine. ---
**Author:** ![ward](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/ward/32/10437_2.png) [@ward](https://forum.ewelink.cc/u/ward)\ **Post date:** [June 4, 2024, 1:32am UTC](https://forum.ewelink.cc/t/m515egzt-motor-curtain/27245/12 "2024-06-04T01:32:24Z")
There should be a button to reset the position (not factory reset). Open your roller fully and set it as Start. Close it fully and set it as End. That should do the trick. If the direction is wrong, use the reverse option or set it the other way around.