# Looking for RGB CCT/RGBW Controller Recommendations (eWeLink & Apple Home Compatibility)

**URL:** <https://forum.ewelink.cc/t/looking-for-rgb-cct-rgbw-controller-recommendations-ewelink-apple-home-compatibility/123053>\
**Category:** Free discussion\
**Created:** [January 20, 2025, 6:58am UTC](https://forum.ewelink.cc/t/looking-for-rgb-cct-rgbw-controller-recommendations-ewelink-apple-home-compatibility/123053 "2025-01-20T06:58:31Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![lukerall](https://avatars.discourse-cdn.com/v4/letter/l/d26b3c/32.png) [@lukerall](https://forum.ewelink.cc/u/lukerall)\
**Post date:** [January 20, 2025, 6:58am UTC](https://forum.ewelink.cc/t/looking-for-rgb-cct-rgbw-controller-recommendations-ewelink-apple-home-compatibility/123053/1 "2025-01-20T06:58:31Z")

</div>

Hi everyone,

I’m looking for advice on finding an RGB CCT or RGBW controller that works with the eWeLink app and, ideally, the Sonoff Zigbee Bridge Ultra (ZigBridge-U). If nothing is compatible, I’m open to getting a Matter-compatible hub to use the controller with both eWeLink and Apple Home.

Here’s my setup and requirements:  
• Running 24V LED strips (RGB CCT or RGBW)  
• The controller needs to support 24 volts and handle a decent amp rating (15–20 amps at 24V)  
• Compatibility with both eWeLink and Apple Home is key

If there’s no controller for the Zigbee Bridge Ultra, I don’t mind buying a dedicated hub just for this use case.

Does anyone have recommendations for:  
1. A controller that works with the Zigbee Bridge Ultra?  
2. A system where the controller connects to a different hub for both platforms?

Thanks in advance for your suggestions!

---

<div class="post-metadata">

**Author:** ![ociepa.ekotox](https://avatars.discourse-cdn.com/v4/letter/o/c68b51/32.png) [@ociepa.ekotox](https://forum.ewelink.cc/u/ociepa.ekotox)\
**Post date:** [January 20, 2025, 8:51am UTC](https://forum.ewelink.cc/t/looking-for-rgb-cct-rgbw-controller-recommendations-ewelink-apple-home-compatibility/123053/2 "2025-01-20T08:51:15Z")

</div>

Sonoff Zigbee Bridge Ultra works as a matter hub after the update.  
You can use this RGBCW controller ( Zemismart ZML3 , or ZML3(CW) )

> **[Zemismart Matter Over WiFi Led Strip Light Controller RGBCW Smart Led Driver...](https://www.zemismart.com/products/zml3?VariantsId=17327)**
>
> Zemismart Matter Over WiFi Led Strip Light Controller RGBCW Smart Led Driver Support Smartthings Alexa Google Home App Control

---

<div class="post-metadata">

**Author:** ![lukerall](https://avatars.discourse-cdn.com/v4/letter/l/d26b3c/32.png) [@lukerall](https://forum.ewelink.cc/u/lukerall)\
**Post date:** [January 20, 2025, 9:01am UTC](https://forum.ewelink.cc/t/looking-for-rgb-cct-rgbw-controller-recommendations-ewelink-apple-home-compatibility/123053/3 "2025-01-20T09:01:44Z")

</div>

I appreciate your response, i will test it out!

The new update is the one string holding me back from using the bridge Ultra as a Ethernet connect door stopper 🤣

---

<div class="post-metadata">

**Author:** ![NelsonSilva](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/nelsonsilva/32/7064_2.png) [@NelsonSilva](https://forum.ewelink.cc/u/NelsonSilva)\
**Post date:** [January 20, 2025, 10:56am UTC](https://forum.ewelink.cc/t/looking-for-rgb-cct-rgbw-controller-recommendations-ewelink-apple-home-compatibility/123053/4 "2025-01-20T10:56:43Z")

</div>

> [@ociepa.ekotox](#):
>
> noff Zigbee Bridge Ultra works as a matter hub after the update.

Wow act as a matter hub? How? I have the 1.7.0 and only see the option to use as matter bridge 🙄

---

<div class="post-metadata">

**Author:** ![ociepa.ekotox](https://avatars.discourse-cdn.com/v4/letter/o/c68b51/32.png) [@ociepa.ekotox](https://forum.ewelink.cc/u/ociepa.ekotox)\
**Post date:** [January 20, 2025, 11:12am UTC](https://forum.ewelink.cc/t/looking-for-rgb-cct-rgbw-controller-recommendations-ewelink-apple-home-compatibility/123053/5 "2025-01-20T11:12:10Z")

</div>

do you have the latest version of ewelink app v5.13.0 for android? IO system has not updated yet.

---

<div class="post-metadata">

**Author:** ![lukerall](https://avatars.discourse-cdn.com/v4/letter/l/d26b3c/32.png) [@lukerall](https://forum.ewelink.cc/u/lukerall)\
**Post date:** [January 20, 2025, 11:13am UTC](https://forum.ewelink.cc/t/looking-for-rgb-cct-rgbw-controller-recommendations-ewelink-apple-home-compatibility/123053/6 "2025-01-20T11:13:02Z")

</div>

Are you on IOS or android?

Right now as far as i know its only avaible for Android (they say IOS update is coming end of Jan Hopefully)

I had to use a spair android phone to use it as a matter hub because my main phone is IOS

---

<div class="post-metadata">

**Author:** ![NelsonSilva](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/nelsonsilva/32/7064_2.png) [@NelsonSilva](https://forum.ewelink.cc/u/NelsonSilva)\
**Post date:** [January 20, 2025, 11:24am UTC](https://forum.ewelink.cc/t/looking-for-rgb-cct-rgbw-controller-recommendations-ewelink-apple-home-compatibility/123053/7 "2025-01-20T11:24:00Z")

</div>

> [@lukerall](#):
>
> to use a spair android phone to use it as a matter hub because my main phone is IOS

Ah I see. Yeah, I’m using IOS 😁 I need to wait then, but is a great news.

Thanks
