# LED strip with motion sensor **URL:** \ **Category:** Free discussion\ **Tags:** scene\ **Created:** [February 15, 2024, 8:44pm UTC](https://forum.ewelink.cc/t/led-strip-with-motion-sensor/28491 "2024-02-15T20:44:32Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![horizn](https://avatars.discourse-cdn.com/v4/letter/h/e99b99/32.png) [@horizn](https://forum.ewelink.cc/u/horizn)\ **Post date:** [February 15, 2024, 8:44pm UTC](https://forum.ewelink.cc/t/led-strip-with-motion-sensor/28491/1 "2024-02-15T20:44:32Z")
Hi, I am planning to install LED strip (L1) along the stairs with motion sensors (SNZB-03) at the bottom and top of stairs. I already have ZB Bridge-P and the question is if this will work all together - turn on the LEDs when someone is approaching and then turn off if there is no motion. ---
**Author:** ![jam3](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/jam3/32/7918_2.png) [@jam3](https://forum.ewelink.cc/u/jam3)\ **Post date:** [February 16, 2024, 3:11am UTC](https://forum.ewelink.cc/t/led-strip-with-motion-sensor/28491/2 "2024-02-16T03:11:15Z")
Indeed, this is possible. Use scenes. ---
**Author:** ![horizn](https://avatars.discourse-cdn.com/v4/letter/h/e99b99/32.png) [@horizn](https://forum.ewelink.cc/u/horizn)\ **Post date:** [February 16, 2024, 9:00am UTC](https://forum.ewelink.cc/t/led-strip-with-motion-sensor/28491/3 "2024-02-16T09:00:32Z")
Are you sure? In L1 specification there is stated that it supports SONOFF PIR3-RF ( Small 433MHz RF PIR Motion Sensor) which my ZB Bridge-P doesn’t support. It also says that it support WiFi. - Do I need to buy RF BridgeR2 to cover 433MHz and motion sensors using this frequency or it will use WiFi instead? If latter, can I use any other Sonoff LED strip supporting WiFi or only L1 support scenes? ---
**Author:** ![jam3](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/jam3/32/7918_2.png) [@jam3](https://forum.ewelink.cc/u/jam3)\ **Post date:** [February 16, 2024, 9:07am UTC](https://forum.ewelink.cc/t/led-strip-with-motion-sensor/28491/4 "2024-02-16T09:07:25Z")
Any Sonoff device that supports WiFi can be triggered by other device, provided they are visible in your eWeLink app so you can create a scene for automation. This is done via eWeLink cloud/app/web. ---
**Author:** ![ociepa.ekotox](https://avatars.discourse-cdn.com/v4/letter/o/c68b51/32.png) [@ociepa.ekotox](https://forum.ewelink.cc/u/ociepa.ekotox)\ **Post date:** [February 16, 2024, 10:47am UTC](https://forum.ewelink.cc/t/led-strip-with-motion-sensor/28491/5 "2024-02-16T10:47:39Z")
For SONOFF PIR3-RF you must have a BridgeR2 RF gateway. If you already have zigbee devices, buy the snzb-03, snzb-03p or SNZB-06P zigbee sensor ---
**Author:** ![jam3](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/jam3/32/7918_2.png) [@jam3](https://forum.ewelink.cc/u/jam3)\ **Post date:** [February 16, 2024, 11:09am UTC](https://forum.ewelink.cc/t/led-strip-with-motion-sensor/28491/6 "2024-02-16T11:09:10Z")
> [@horizn](#): > > SONOFF PIR3-RF Why the SONOFF PIR3-RF when you already have the ZB Bridge-P? Buy a Zigbee motion sensor. ---
**Author:** ![horizn](https://avatars.discourse-cdn.com/v4/letter/h/e99b99/32.png) [@horizn](https://forum.ewelink.cc/u/horizn)\ **Post date:** [February 16, 2024, 1:44pm UTC](https://forum.ewelink.cc/t/led-strip-with-motion-sensor/28491/7 "2024-02-16T13:44:40Z")
That was my question how LED stripe works. If it can integrate via the WiFi then yeah I can use existing configuration otherwise I was confused because only L1 has motion sensor mentioned in description. Manuals attached on the product page are also not very helpful in this matter. I would expect a section where there is a link or list of possible ideas/available integrations especially for some one who is doing this particular thing for the first time. ---
**Author:** ![jam3](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/jam3/32/7918_2.png) [@jam3](https://forum.ewelink.cc/u/jam3)\ **Post date:** [February 16, 2024, 1:54pm UTC](https://forum.ewelink.cc/t/led-strip-with-motion-sensor/28491/8 "2024-02-16T13:54:03Z")
Your L1 stripe is a WiFi device. You have a ZB Bridge-P, right? Both devices are WiFi connected. Add a Zigbee motion detector to the bridge. Create scenes for automation. You’ll be all right. ---
**Author:** ![mezeibela63](https://avatars.discourse-cdn.com/v4/letter/m/e8c25b/32.png) [@mezeibela63](https://forum.ewelink.cc/u/mezeibela63)\ **Post date:** [February 22, 2024, 9:43pm UTC](https://forum.ewelink.cc/t/led-strip-with-motion-sensor/28491/9 "2024-02-22T21:43:15Z")
You have to consider that the ZB motion sensor has a cooling time for about 1 min! In that time period the sensor will not detect any motion! ---
**Author:** ![thilovonuslar](https://avatars.discourse-cdn.com/v4/letter/t/ebca7d/32.png) [@thilovonuslar](https://forum.ewelink.cc/u/thilovonuslar)\ **Post date:** [April 23, 2024, 3:42pm UTC](https://forum.ewelink.cc/t/led-strip-with-motion-sensor/28491/10 "2024-04-23T15:42:27Z")
I have the same problem. It has not detected movement for 3 weeks. It remains stuck in presence detected. I have it connected to a ZBBridge. I have been writing to Sonoff customer service for days. But they are playing hard to get. ---
**Author:** ![morgan](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/morgan/32/3184_2.png) [@morgan](https://forum.ewelink.cc/u/morgan)\ **Post date:** [April 23, 2024, 4:17pm UTC](https://forum.ewelink.cc/t/led-strip-with-motion-sensor/28491/11 "2024-04-23T16:17:44Z")
> [@thilovonuslar](#): > > I have the same problem. It has not detected movement for 3 weeks. It remains stuck in presence detected. I have it connected to a ZBBridge. I have been writing to Sonoff customer service for days. But they are playing hard to get. Perform a reset, remove the sensor from ewelink, reset the device and pair again. ---
**Author:** ![horizn](https://avatars.discourse-cdn.com/v4/letter/h/e99b99/32.png) [@horizn](https://forum.ewelink.cc/u/horizn)\ **Post date:** [April 23, 2024, 6:05pm UTC](https://forum.ewelink.cc/t/led-strip-with-motion-sensor/28491/12 "2024-04-23T18:05:48Z")
Mine works fine, I have two sensors. In my configuration I have them triggering only during the particular time of the day. Earlier I found it stuck shining but managed to fix it by making no motion detect time slot 5 minutes longer. ---
**Author:** ![thilovonuslar](https://avatars.discourse-cdn.com/v4/letter/t/ebca7d/32.png) [@thilovonuslar](https://forum.ewelink.cc/u/thilovonuslar)\ **Post date:** [April 24, 2024, 12:44pm UTC](https://forum.ewelink.cc/t/led-strip-with-motion-sensor/28491/13 "2024-04-24T12:44:39Z")
Thanks a lot. Now it works perfectly.