# Issues with thermometers SNZB-02DR2

**URL:** <https://forum.ewelink.cc/t/issues-with-thermometers-snzb-02dr2/207499>\
**Category:** Ideas & Suggestion\
**Created:** [February 2, 2026, 12:05am UTC](https://forum.ewelink.cc/t/issues-with-thermometers-snzb-02dr2/207499 "2026-02-02T00:05:10Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![matteo77pr](https://avatars.discourse-cdn.com/v4/letter/m/41988e/32.png) [@matteo77pr](https://forum.ewelink.cc/u/matteo77pr)\
**Post date:** [February 2, 2026, 12:05am UTC](https://forum.ewelink.cc/t/issues-with-thermometers-snzb-02dr2/207499/1 "2026-02-02T00:05:10Z")

</div>

Hi,

I have 2 new zigbee SNZB-02DR2 connected to NSPanelPro120 (id 100243bd3d) that I cannot fully use for my scopes:

1. Thermometers ar correctly connected to Ewelink via NSPanelPro but I cannot use them as a trigger (IF Condition) for scenes so I cannot replace the old zigbee thermometers. When is planned to have them available for scenes?

2. These thermometers are not available in Ewelink web: they are visible but the application says that are not supported:

3. I have tried to update firmware multiple times from 1.0.2 to 1.0.3. The bar arrives to 100% but both thermometer are still at 1.0.2 version and cannot upgrade

Thank you in advance If someone can answer to my questions.

Matteo