# Improve after long time

**URL:** <https://forum.ewelink.cc/t/improve-after-long-time/21544>\
**Category:** Ideas & Suggestion\
**Created:** [September 8, 2023, 5:34pm UTC](https://forum.ewelink.cc/t/improve-after-long-time/21544 "2023-09-08T17:34:15Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![tiomiguel.geo](https://avatars.discourse-cdn.com/v4/letter/t/4491bb/32.png) [@tiomiguel.geo](https://forum.ewelink.cc/u/tiomiguel.geo)\
**Post date:** [September 8, 2023, 5:34pm UTC](https://forum.ewelink.cc/t/improve-after-long-time/21544/1 "2023-09-08T17:34:15Z")

</div>

Years using EWELINK, I think you have to introduce:

- AUTODISABLE scene when executed -for avoiding repeating more and more times the same scene, triggered by a sensor…
- FIX DST: If something has to sart at 8:00 is ALWAYS at 8:00
- Scene has to be capable to be triggered by more THAN ONE sensors asigne to a RF BRIDGE. Now only ONE RF sensor can be put as trigger in RF BRIDGE  
These features are BASIC.
- Better WEB implementation. RF sensors have to be shown

---

<div class="post-metadata">

**Author:** ![songal](https://avatars.discourse-cdn.com/v4/letter/s/c67d28/32.png) [@songal](https://forum.ewelink.cc/u/songal)\
**Post date:** [September 11, 2023, 3:30am UTC](https://forum.ewelink.cc/t/improve-after-long-time/21544/4 "2023-09-11T03:30:42Z")

</div>

- If a scene is triggered during execution, it will stop the current execution process and start the scene from the beginning. Since there is a long delay in scene execution, not responding to any triggers during that time can be very problematic, especially if there are multiple conditions in the trigger;

- The DST of the scene needs to be evaluated properly, as some scenes are timed locally on the device;

- The RF bridge cannot be triggered by multiple sensors at the same time, because sensor triggering is instantaneous and state-less, and it is very unlikely that multiple instantaneous signals will occur at the same time (at the ms level). Unlike switches, lights and other types of devices, these devices have a state of retention, such as lights in the momentary trigger for the “on”, it will always keep the “on” state, in this state, if a transient signal is generated (e.g. RF bridge triggered by a wireless button), and the state + transient signal can be used as the trigger condition.