# Ihost & Tongou TO-Q-SY1-JZT

**URL:** <https://forum.ewelink.cc/t/ihost-tongou-to-q-sy1-jzt/24205>\
**Category:** eWeLink CUBE\
**Created:** [November 10, 2023, 3:20pm UTC](https://forum.ewelink.cc/t/ihost-tongou-to-q-sy1-jzt/24205 "2023-11-10T15:20:36Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![sintoxx](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/sintoxx/32/3644_2.png) [@sintoxx](https://forum.ewelink.cc/u/sintoxx)\
**Post date:** [November 10, 2023, 3:20pm UTC](https://forum.ewelink.cc/t/ihost-tongou-to-q-sy1-jzt/24205/1 "2023-11-10T15:20:36Z")

</div>

Someone has tried these modules, yes the ihost accepts them but I wanted to get the measurement data, because these modules have that option for you, but with the ihost it does not give me values ​​only the state of the switch.

---

<div class="post-metadata">

**Author:** ![Teki](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/teki/32/1161_2.png) [@Teki](https://forum.ewelink.cc/u/Teki)\
**Post date:** [November 13, 2023, 8:32am UTC](https://forum.ewelink.cc/t/ihost-tongou-to-q-sy1-jzt/24205/2 "2023-11-13T08:32:03Z")

</div>

Hi,  
yes this device is not fully supported yet, currently only support the state of swtich.

---

<div class="post-metadata">

**Author:** ![sintoxx](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/sintoxx/32/3644_2.png) [@sintoxx](https://forum.ewelink.cc/u/sintoxx)\
**Post date:** [November 13, 2023, 10:24am UTC](https://forum.ewelink.cc/t/ihost-tongou-to-q-sy1-jzt/24205/3 "2023-11-13T10:24:18Z")

</div>

I love the rail relay unit, and I hoped it could control consumption. Thanks for the bad news XD

---

<div class="post-metadata">

**Author:** ![fabrizio](https://avatars.discourse-cdn.com/v4/letter/f/8dc957/32.png) [@fabrizio](https://forum.ewelink.cc/u/fabrizio)\
**Post date:** [June 26, 2024, 9:47am UTC](https://forum.ewelink.cc/t/ihost-tongou-to-q-sy1-jzt/24205/4 "2024-06-26T09:47:42Z")

</div>

Hello, I’m trying to add TO-Q-SY1-JZT to zigbee bridge or to ihost but without success!

How did you pair it to ewelink “World”?

Thanks

FB

---

<div class="post-metadata">

**Author:** ![sintoxx](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/sintoxx/32/3644_2.png) [@sintoxx](https://forum.ewelink.cc/u/sintoxx)\
**Post date:** [July 12, 2024, 5:48pm UTC](https://forum.ewelink.cc/t/ihost-tongou-to-q-sy1-jzt/24205/5 "2024-07-12T17:48:17Z")

</div>

Like any other zigbee sensor, I put it in pairing mode, it detects it and I give it a name, etc… and it works perfectly.

I used it with ihost.