# iHost Pairing with Current Devices and Remote Access

**URL:** <https://forum.ewelink.cc/t/ihost-pairing-with-current-devices-and-remote-access/28010>\
**Category:** eWeLink CUBE\
**Tags:** ihost\
**Created:** [February 3, 2024, 6:29pm UTC](https://forum.ewelink.cc/t/ihost-pairing-with-current-devices-and-remote-access/28010 "2024-02-03T18:29:28Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Daniel\_Zhan](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/daniel_zhan/32/622_2.png) [@Daniel\_Zhan](https://forum.ewelink.cc/u/Daniel_Zhan)\
**Post date:** [February 4, 2024, 3:18am UTC](https://forum.ewelink.cc/t/ihost-pairing-with-current-devices-and-remote-access/28010/2 "2024-02-04T03:18:14Z")

</div>

You don’t need to re-pair the devices, please check this instruction to sync the WiFi LAN device from eWeLink APP.

**eWeLink Smart Home add-on：**

> [@【Add-on Guide】eWeLink Smart Home](https://forum.ewelink.cc/t/add-on-guide-ewelink-smart-home/15498):
>
> How to install the eWeLink Smart Home add-on in CUBE? Navigate to the ‘Docker’ menu on the left Find eWeLink Smart Home and click “Install” Click ‘RUN’ to run the add-on On the add-on page, log in with your eWeLink account. Click the ‘Sync’ to sync your device into CUBE (iHost) Not under your account: Check if this device was shared with you by someone else. Not supported: Device with LAN-control feature will be supported one by one. Q…

Be sure that the WiFi devices are on the same LAN with iHost.

---

_[View the full topic](https://forum.ewelink.cc/t/ihost-pairing-with-current-devices-and-remote-access/28010)._