# iHost and SNZB-02D, how to read the temperature more often?

**URL:** <https://forum.ewelink.cc/t/ihost-and-snzb-02d-how-to-read-the-temperature-more-often/117553>\
**Category:** eWeLink CUBE\
**Created:** [January 9, 2025, 1:24pm UTC](https://forum.ewelink.cc/t/ihost-and-snzb-02d-how-to-read-the-temperature-more-often/117553 "2025-01-09T13:24:01Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![philchamp51](https://avatars.discourse-cdn.com/v4/letter/p/977dab/32.png) [@philchamp51](https://forum.ewelink.cc/u/philchamp51)\
**Post date:** [January 9, 2025, 1:24pm UTC](https://forum.ewelink.cc/t/ihost-and-snzb-02d-how-to-read-the-temperature-more-often/117553/1 "2025-01-09T13:24:01Z")

</div>

Hello.

I would like to know how iHost can read the temperature from SNZB-02D more often ?  
In fact, I would like iHost to be able to be informed of each temperature change of + or - 0.1°C to turn on and off my 2 electric radiators with more precision and responsiveness.  
Thank you.

---

<div class="post-metadata">

**Author:** ![SuiKa](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/suika/32/8656_2.png) [@SuiKa](https://forum.ewelink.cc/u/SuiKa)\
**Post date:** [January 10, 2025, 8:15am UTC](https://forum.ewelink.cc/t/ihost-and-snzb-02d-how-to-read-the-temperature-more-often/117553/2 "2025-01-10T08:15:24Z")

</div>

The report interval is controled by the device, not iHost.  
So we can’t modify it for you.  
We’ll send the request to device firmware team and they’ll verify if it’s possible.

---

<div class="post-metadata">

**Author:** ![philchamp51](https://avatars.discourse-cdn.com/v4/letter/p/977dab/32.png) [@philchamp51](https://forum.ewelink.cc/u/philchamp51)\
**Post date:** [January 10, 2025, 10:20am UTC](https://forum.ewelink.cc/t/ihost-and-snzb-02d-how-to-read-the-temperature-more-often/117553/3 "2025-01-10T10:20:31Z")

</div>

Ok. Thanks for your answer.  
It would be nice to have the ability to adjust the frequency of data sending to manage your heating precisely.  
Philippe.

---

<div class="post-metadata">

**Author:** ![riori](https://avatars.discourse-cdn.com/v4/letter/r/d2c977/32.png) [@riori](https://forum.ewelink.cc/u/riori)\
**Post date:** [January 16, 2025, 4:13pm UTC](https://forum.ewelink.cc/t/ihost-and-snzb-02d-how-to-read-the-temperature-more-often/117553/4 "2025-01-16T16:13:15Z")

</div>

> [@SuiKa](#):
>
> The report interval is controled by the device, not iHost.  
> So we can’t modify it for you.

Incorrect statement.  
Zigbee2MQTT allows you to change the intervals for sending reports.

> [@SNZB-02P Temperature update intervals](https://forum.ewelink.cc/t/snzb-02p-temperature-update-intervals/117685/6):
>
> I disagree. I connected the same sensor to the Home Assistant. I have specified in the settings to send reports every 20 minutes play_button Summary