# How to add a custom Zigbee sensor

**URL:** <https://forum.ewelink.cc/t/how-to-add-a-custom-zigbee-sensor/31069>\
**Category:** eWeLink CUBE\
**Created:** [April 19, 2024, 3:16pm UTC](https://forum.ewelink.cc/t/how-to-add-a-custom-zigbee-sensor/31069 "2024-04-19T15:16:42Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![private.robert.simon](https://avatars.discourse-cdn.com/v4/letter/p/8e8cbc/32.png) [@private.robert.simon](https://forum.ewelink.cc/u/private.robert.simon)\
**Post date:** [April 19, 2024, 3:16pm UTC](https://forum.ewelink.cc/t/how-to-add-a-custom-zigbee-sensor/31069/1 "2024-04-19T15:16:42Z")

</div>

Hi, I want to add a vibration sensor to iHost, it is on 1.13.7.  
The sensors are found and added, but on the home screen i see “Not supported yet”.  
for the \_TZ3000\_bmfw9ykl i can see the battery state and ID, for the \_TZ3000\_lzdjjfss only the ID.  
Can I add them somehow, defining a driver or so?  
Thanks!

---

<div class="post-metadata">

**Author:** ![jam3](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/jam3/32/7918_2.png) [@jam3](https://forum.ewelink.cc/u/jam3)\
**Post date:** [April 19, 2024, 3:22pm UTC](https://forum.ewelink.cc/t/how-to-add-a-custom-zigbee-sensor/31069/2 "2024-04-19T15:22:42Z")

</div>

No, you can’t. As you can see, the device is not supported. I t may be supported one day at the time but do not take it for granted.

---

<div class="post-metadata">

**Author:** ![private.robert.simon](https://avatars.discourse-cdn.com/v4/letter/p/8e8cbc/32.png) [@private.robert.simon](https://forum.ewelink.cc/u/private.robert.simon)\
**Post date:** [April 19, 2024, 7:12pm UTC](https://forum.ewelink.cc/t/how-to-add-a-custom-zigbee-sensor/31069/3 "2024-04-19T19:12:04Z")

</div>

Thank you for your answer!  
I think it would be logical if there would be an option to configure random zigbee devices. As I see the iHost has a lot of potential, but on the device side it is a bit limited yet. Thanks!