# Ewelink issue in Homeassistant

**URL:** <https://forum.ewelink.cc/t/ewelink-issue-in-homeassistant/29871>\
**Category:** Uncategorized\
**Created:** [March 24, 2024, 3:46pm UTC](https://forum.ewelink.cc/t/ewelink-issue-in-homeassistant/29871 "2024-03-24T15:46:08Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![calvinwh](https://avatars.discourse-cdn.com/v4/letter/c/8797f3/32.png) [@calvinwh](https://forum.ewelink.cc/u/calvinwh)\
**Post date:** [March 24, 2024, 3:46pm UTC](https://forum.ewelink.cc/t/ewelink-issue-in-homeassistant/29871/1 "2024-03-24T15:46:08Z")

</div>

I have been trying to re-intergrate Ewelink back into Homeassistant, but the Git hub add-in fails to show. Not sure what the issue mught be.

---

<div class="post-metadata">

**Author:** ![ward](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/ward/32/10437_2.png) [@ward](https://forum.ewelink.cc/u/ward)\
**Post date:** [March 25, 2024, 6:15am UTC](https://forum.ewelink.cc/t/ewelink-issue-in-homeassistant/29871/2 "2024-03-25T06:15:35Z")

</div>

Are you using this add-on?

> **[GitHub - CoolKit-Technologies/ha-addon](https://github.com/CoolKit-Technologies/ha-addon)**
>
> Contribute to CoolKit-Technologies/ha-addon development by creating an account on GitHub.

Can u plz explain a little bit more about your steps? And from where did it absent?

Thx in advance.

---

<div class="post-metadata">

**Author:** ![jam3](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/jam3/32/7918_2.png) [@jam3](https://forum.ewelink.cc/u/jam3)\
**Post date:** [March 25, 2024, 6:29am UTC](https://forum.ewelink.cc/t/ewelink-issue-in-homeassistant/29871/3 "2024-03-25T06:29:10Z")

</div>

To see this add-on, you must first add a repository in the Add-on store. Otherwise it will not be visible.  
As a side note, this add-on is quite old and has not been updated for a long time. Instead, use [Sonoff LAN](https://github.com/AlexxIT/SonoffLAN). You can get it via HACS [HACS \> Integrations \> Plus \> SonoffLAN]. It works very well. Sonoff device support can be in LAN or cloud mode (Zigbee and some WiFi). This add-on allows you to use S-Mate and R5 in HA! Most importantly, it is being constantly developed and updated.
