# EARU 1P+N Din Rail WIFI Smart Energy Meter

**URL:** <https://forum.ewelink.cc/t/earu-1p-n-din-rail-wifi-smart-energy-meter/38252>\
**Category:** Ideas & Suggestion\
**Created:** [June 27, 2024, 8:32pm UTC](https://forum.ewelink.cc/t/earu-1p-n-din-rail-wifi-smart-energy-meter/38252 "2024-06-27T20:32:22Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![ssl-everest](https://avatars.discourse-cdn.com/v4/letter/s/3da27b/32.png) [@ssl-everest](https://forum.ewelink.cc/u/ssl-everest)\
**Post date:** [June 27, 2024, 8:32pm UTC](https://forum.ewelink.cc/t/earu-1p-n-din-rail-wifi-smart-energy-meter/38252/1 "2024-06-27T20:32:22Z")

</div>

I would really like to make scripts using the power consumed. But this is not available when I create a script.  
For example: if consumption is more than 3000W, turn off the boiler.

---

<div class="post-metadata">

**Author:** ![ward](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/ward/32/10437_2.png) [@ward](https://forum.ewelink.cc/u/ward)\
**Post date:** [June 28, 2024, 2:01am UTC](https://forum.ewelink.cc/t/earu-1p-n-din-rail-wifi-smart-energy-meter/38252/2 "2024-06-28T02:01:28Z")

</div>

@songal

---

<div class="post-metadata">

**Author:** ![songal](https://avatars.discourse-cdn.com/v4/letter/s/c67d28/32.png) [@songal](https://forum.ewelink.cc/u/songal)\
**Post date:** [July 8, 2024, 8:34am UTC](https://forum.ewelink.cc/t/earu-1p-n-din-rail-wifi-smart-energy-meter/38252/3 "2024-07-08T08:34:10Z")

</div>

The use of consumed power as a scene trigger condition requires device firmware support, currently available devices are the following four in the figure  
 ![image](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/3/314ae0c5972230f627e850119fdbdfc11072e609.png)