# \[Discussion\] About ZigBee2CUBE and NON-Zigbee 3.0 devices compatibility **URL:** \ **Category:** eWeLink CUBE\ **Tags:** zigbee, ihost\ **Created:** [May 18, 2023, 7:09am UTC](https://forum.ewelink.cc/t/discussion-about-zigbee2cube-and-non-zigbee-3-0-devices-compatibility/17848 "2023-05-18T07:09:24Z")\ **Posts on this page:** 20\ **Page:** 8
**Author:** ![eryk.sokolowski](https://avatars.discourse-cdn.com/v4/letter/e/f1d935/32.png) [@eryk.sokolowski](https://forum.ewelink.cc/u/eryk.sokolowski)\ **Post date:** [October 16, 2023, 5:33pm UTC](https://forum.ewelink.cc/t/discussion-about-zigbee2cube-and-non-zigbee-3-0-devices-compatibility/17848/146 "2023-10-16T17:33:52Z")
Hi @yitie I want to ask about my curtain motor controllers I have been waiting a really lont time now (since June) I have bought another one which doesn’t work either, can you please help the two models I have : - [List item AM43-0.45/40-ES-EB manufactured by Moes Zigbee ID: TS0601 | \_TZE200\_zah67ekd | \_TZE200\_rddyvrci](https://zigbee.blakadder.com/Moes_AM43-0_45_40-ES-EB.html) - [List item Model ZM85EL-1x manufactured by Zemismart Zigbee ID: TS0601 | \_TZE200\_pw7mji0l](https://zigbee.blakadder.com/Zemismart_ZM85EL-1Z.html) Could you advise what can I do to get those working with Ihost as my Zigbee hub? ---
**Author:** ![yitie](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/yitie/32/3613_2.png) [@yitie](https://forum.ewelink.cc/u/yitie)\ **Post date:** [October 17, 2023, 2:09am UTC](https://forum.ewelink.cc/t/discussion-about-zigbee2cube-and-non-zigbee-3-0-devices-compatibility/17848/147 "2023-10-17T02:09:43Z")
Let me check the status and get to you back later. ---
**Author:** ![yitie](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/yitie/32/3613_2.png) [@yitie](https://forum.ewelink.cc/u/yitie)\ **Post date:** [October 18, 2023, 4:14am UTC](https://forum.ewelink.cc/t/discussion-about-zigbee2cube-and-non-zigbee-3-0-devices-compatibility/17848/148 "2023-10-18T04:14:45Z")
> [@eryk.sokolowski](#): > > - [List item AM43-0.45/40-ES-EB manufactured by Moes Zigbee ID: TS0601 | \_TZE200\_zah67ekd | \_TZE200\_rddyvrci](https://zigbee.blakadder.com/Moes_AM43-0_45_40-ES-EB.html) > - [List item Model ZM85EL-1x manufactured by Zemismart > Zigbee ID: TS0601 | \_TZE200\_pw7mji0l](https://zigbee.blakadder.com/Zemismart_ZM85EL-1Z.html) Technically, those devices are the same by using Tuya’s solution, And you can find it on the same line,[19, in the supported list](https://docs.google.com/spreadsheets/d/1VLuhpznuQzMkMwKJWO9L87Y7wX5Nw-DUdhUmIAhVgY4/edit#gid=0), So, as I replied earlier as well as commented in the , more information and the logs(haven’t found it in the ticket system) needed to investigate further. > What does it mean by "it doesn’t have the right features“? Would you please send me the details on the forum or feedback channel? ---
**Author:** ![yitie](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/yitie/32/3613_2.png) [@yitie](https://forum.ewelink.cc/u/yitie)\ **Post date:** [October 18, 2023, 4:16am UTC](https://forum.ewelink.cc/t/discussion-about-zigbee2cube-and-non-zigbee-3-0-devices-compatibility/17848/149 "2023-10-18T04:16:54Z")
This device it’s not on the supported list yet. ---
**Author:** ![yitie](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/yitie/32/3613_2.png) [@yitie](https://forum.ewelink.cc/u/yitie)\ **Post date:** [October 18, 2023, 4:20am UTC](https://forum.ewelink.cc/t/discussion-about-zigbee2cube-and-non-zigbee-3-0-devices-compatibility/17848/150 "2023-10-18T04:20:17Z")
Copy that this issue is also reported earlier by @cliff and @andy.wolf, and we have received logs from Andy days ago and our engineers are on the way to addressing the issue. Let you know we have something. Edit, Happy to let you know that our team has fixed this issue and planned to release new updates with next firmware in the middle of November. ![image](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/a/aa0f5883ce095d52764d8aceaeddc5b576ebb71c.png) ---
**Author:** ![andy.wolf](https://avatars.discourse-cdn.com/v4/letter/a/7ab992/32.png) [@andy.wolf](https://forum.ewelink.cc/u/andy.wolf)\ **Post date:** [October 19, 2023, 2:40pm UTC](https://forum.ewelink.cc/t/discussion-about-zigbee2cube-and-non-zigbee-3-0-devices-compatibility/17848/151 "2023-10-19T14:40:03Z")
Great - thanks, @yitie Looking forward to the update ---
**Author:** ![darkeagle](https://avatars.discourse-cdn.com/v4/letter/d/13edae/32.png) [@darkeagle](https://forum.ewelink.cc/u/darkeagle)\ **Post date:** [October 20, 2023, 5:45am UTC](https://forum.ewelink.cc/t/discussion-about-zigbee2cube-and-non-zigbee-3-0-devices-compatibility/17848/152 "2023-10-20T05:45:19Z")
Hello @yitie, Please consider this device: [https://it.aliexpress.com/item/1005005881727281.html?spm=a2g0o.order\_list.order\_list\_main.5.6dc93696h42IzW&gatewayAdapt=glo2ita](https://it.aliexpress.com/item/1005005881727281.html?spm=a2g0o.order_list.order_list_main.5.6dc93696h42IzW&gatewayAdapt=glo2ita) it is a two channel energy meter that is alread detected by iHost as “\_TZE204\_81yrt3lo” but only as a single swith. I’m not able to see the measurement. I did a search on the net and found that zigbee2mqtt already support it, you can find more [info here](https://github.com/zigpy/zha-device-handlers/issues/2549) [and here](https://github.com/Koenkk/zigbee2mqtt/issues/18419#issuecomment-1657066719). It would be great if you can fully support it into iHost. Waiting for an answer, thanks! D ---
**Author:** ![sintoxx](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/sintoxx/32/3644_2.png) [@sintoxx](https://forum.ewelink.cc/u/sintoxx)\ **Post date:** [November 10, 2023, 3:24pm UTC](https://forum.ewelink.cc/t/discussion-about-zigbee2cube-and-non-zigbee-3-0-devices-compatibility/17848/153 "2023-11-10T15:24:03Z")
Ihost & Tongou TO-Q-SY1-JZT Someone has tried these modules, yes the ihost accepts them but I wanted to get the measurement data, because these modules have that option for you, but with the ihost it does not give me values ​​only the state of the switch. ---
**Author:** ![jam3](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/jam3/32/7918_2.png) [@jam3](https://forum.ewelink.cc/u/jam3)\ **Post date:** [November 19, 2023, 5:11am UTC](https://forum.ewelink.cc/t/discussion-about-zigbee2cube-and-non-zigbee-3-0-devices-compatibility/17848/154 "2023-11-19T05:11:33Z")
The spreadsheet shared on Google Docs is pretty much outdated. Is any update around the corner? ---
**Author:** ![yitie](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/yitie/32/3613_2.png) [@yitie](https://forum.ewelink.cc/u/yitie)\ **Post date:** [November 19, 2023, 5:25am UTC](https://forum.ewelink.cc/t/discussion-about-zigbee2cube-and-non-zigbee-3-0-devices-compatibility/17848/155 "2023-11-19T05:25:44Z")
We are adding the capabilities of this feature generally, based on users feedback, We are on some slightly changes coming with monthly updates, Please let me know what’s your issue specifically and we will check It to see if some improvement can taken. ---
**Author:** ![jam3](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/jam3/32/7918_2.png) [@jam3](https://forum.ewelink.cc/u/jam3)\ **Post date:** [November 19, 2023, 5:52am UTC](https://forum.ewelink.cc/t/discussion-about-zigbee2cube-and-non-zigbee-3-0-devices-compatibility/17848/157 "2023-11-19T05:52:22Z")
The newest CUBE Version 1.11.0 brought support for Ikea Tradfri E1745 Motion Sensor. It works as expected. However, it is not present on the ZigBee Map or it is seen as not connected to anything (floating). Device’s battery status is shown as “unknown” but on its tile it is green. ---
**Author:** ![vudt.93](https://avatars.discourse-cdn.com/v4/letter/v/898d66/32.png) [@vudt.93](https://forum.ewelink.cc/u/vudt.93)\ **Post date:** [November 19, 2023, 7:51am UTC](https://forum.ewelink.cc/t/discussion-about-zigbee2cube-and-non-zigbee-3-0-devices-compatibility/17848/158 "2023-11-19T07:51:05Z")
Hi. I have some wall switch from MOES. They can be added to iHost but I can not control their channel separately. I can do that physically but on the UI when I turn on one of them, the other one will also turn on. device id: a4c1386fa2f28b98 Manufacturer: \_TZ3000\_18ejxno0 ---
**Author:** ![vdrijver](https://avatars.discourse-cdn.com/v4/letter/v/ed8c4c/32.png) [@vdrijver](https://forum.ewelink.cc/u/vdrijver)\ **Post date:** [November 19, 2023, 12:33pm UTC](https://forum.ewelink.cc/t/discussion-about-zigbee2cube-and-non-zigbee-3-0-devices-compatibility/17848/159 "2023-11-19T12:33:15Z")
s it possible to add the sonoff ZB Bridge and the Tuya Zigbee gateway ZXGWZ-04 to the ihost? That will greatly improve the range of the Zigbee signal from the ihost here in the house. And when will you ensure that the ihost creates a Zigbee mesh network? Now it is a tree network, which means that ZigBee devices keep failing ---
**Author:** ![Jemma](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/jemma/32/8657_2.png) [@Jemma](https://forum.ewelink.cc/u/Jemma)\ **Post date:** [November 20, 2023, 8:08am UTC](https://forum.ewelink.cc/t/discussion-about-zigbee2cube-and-non-zigbee-3-0-devices-compatibility/17848/160 "2023-11-20T08:08:25Z")
Can you provide us with the system log? You can go to the iHost setup page to download the system log and upload it to us through the feedback portal, thank you very much ---
**Author:** ![Jemma](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/jemma/32/8657_2.png) [@Jemma](https://forum.ewelink.cc/u/Jemma)\ **Post date:** [November 20, 2023, 8:12am UTC](https://forum.ewelink.cc/t/discussion-about-zigbee2cube-and-non-zigbee-3-0-devices-compatibility/17848/161 "2023-11-20T08:12:30Z")
The zigbee map only shows the current connection between the zigbee device and the parent node along with the LQI value. It does not show the relationship between all neighbor tables of zigbee devices, but the zigbee network used by iHost’s actual zigbee is a mesh structure. ---
**Author:** ![ociepa.ekotox](https://avatars.discourse-cdn.com/v4/letter/o/c68b51/32.png) [@ociepa.ekotox](https://forum.ewelink.cc/u/ociepa.ekotox)\ **Post date:** [November 20, 2023, 10:03am UTC](https://forum.ewelink.cc/t/discussion-about-zigbee2cube-and-non-zigbee-3-0-devices-compatibility/17848/162 "2023-11-20T10:03:16Z")
does this mean the zigbee map will never show the connection between two routers? ![Zigbee Map](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/c/c54c108df3451d192634d864ed51169881f8e671.jpeg) ![Zigbee Map_test](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/6/66dc94bc299ea3aa9bf0dbf404cfd538aa72a807.jpeg) ---
**Author:** ![eerke](https://avatars.discourse-cdn.com/v4/letter/e/eb9ed0/32.png) [@eerke](https://forum.ewelink.cc/u/eerke)\ **Post date:** [November 20, 2023, 11:45am UTC](https://forum.ewelink.cc/t/discussion-about-zigbee2cube-and-non-zigbee-3-0-devices-compatibility/17848/163 "2023-11-20T11:45:54Z")
I had this discussion with their support and it is a mesh even if on their Zigbee map it looks not mesh like. You can get router to router connections only if they both don’t have direct good connections to the coordinator. So for example if router 1 connected to the coordinator then router 2 can connect to router 1 as long as it does not connect as well to the coordinator itself. I personally think they should incorporate a mesh appearance, like ZHA and Zigbee2MQTT do, so it is less confusing and encourages the use of more router devices rather than end-devices, but that is not how they have chosen to display it. ---
**Author:** ![ChrisC](https://avatars.discourse-cdn.com/v4/letter/c/8baadc/32.png) [@ChrisC](https://forum.ewelink.cc/u/ChrisC)\ **Post date:** [November 25, 2023, 2:06pm UTC](https://forum.ewelink.cc/t/discussion-about-zigbee2cube-and-non-zigbee-3-0-devices-compatibility/17848/164 "2023-11-25T14:06:18Z")
Hi ref to “IKEA E1603/E1702/E1708 TRADFRI control outlet switch power” of below list. ![image](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/5/5b1b2f3e1c66bf694e60a1b84850169c8a387367.png) I tried to connect to iHost but it is not detected (after it is set in pairing mode). Did I miss a step to pair it or it shouldn’t appear in the list (didn’t see any post on it so far ?) - pls advice. Tks Chris ---
**Author:** ![ChrisC](https://avatars.discourse-cdn.com/v4/letter/c/8baadc/32.png) [@ChrisC](https://forum.ewelink.cc/u/ChrisC)\ **Post date:** [November 25, 2023, 2:38pm UTC](https://forum.ewelink.cc/t/discussion-about-zigbee2cube-and-non-zigbee-3-0-devices-compatibility/17848/165 "2023-11-25T14:38:47Z")
oops… set the Zigbee2CUBE option in ‘pilot features’ in iHost & the device got detected and I could set it ‘on’ once, then it got ‘off’ stuck… and ‘failed to control’ ![image](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/b/b4ea0428ede56e4eb66190ee50a73696cd3b1b49.png) ![image](https://europe1.discourse-cdn.com/flex005/uploads/ewelinkforum/original/2X/1/11c9e5213158486002ff71dd21584234332905bd.png) Any hint ? ---
**Author:** ![ucl.matthew](https://avatars.discourse-cdn.com/v4/letter/u/b5ac83/32.png) [@ucl.matthew](https://forum.ewelink.cc/u/ucl.matthew)\ **Post date:** [November 26, 2023, 1:16am UTC](https://forum.ewelink.cc/t/discussion-about-zigbee2cube-and-non-zigbee-3-0-devices-compatibility/17848/166 "2023-11-26T01:16:21Z")
Ikea Vindstyrka Air Quality Sensor only expose temperature and humidity but pm25 and voc\_index are not supported > **[IKEA Vindstyrka Air Quality Sensor E2112 Zigbee compatibility](https://zigbee.blakadder.com/Ikea_E2112.html)** > > Zigbee ID: VINDSTYRKA - IKEA E2112 compatibility with third party gateways Ikea Tradfri Shortcut Button not supported > **[IKEA Tradfri Shortcut Button (White) E1812 Zigbee compatibility](https://zigbee.blakadder.com/Ikea_E1812.html)** > > Zigbee ID: TRADFRI shortcut button - IKEA E1812 compatibility with third party gateways Ikea Rodret Wireless Dimmer not supported > **[IKEA Rodret Wireless Dimmer E2201 Zigbee compatibility](https://zigbee.blakadder.com/Ikea_E2201.html)** > > Zigbee ID: RODRET dimmer - IKEA E2201 compatibility with third party gateways Ikea Styrbar Remote Control not supported > **[IKEA Styrbar Remote Control (White) E2001 Zigbee compatibility](https://zigbee.blakadder.com/Ikea_E2002.html)** > > Zigbee ID: Remote Control N2 - IKEA E2001 compatibility with third party gateways Cube not supported > **[Aqara Cube MFKZQ01LM Zigbee compatibility](https://zigbee.blakadder.com/Aqara_MFKZQ01LM.html)** > > Zigbee ID: lumi.sensor\_cube | lumi.sensor\_cube.aqgl01 - Aqara MFKZQ01LM compatibility with third party gateways [Previous page](https://forum.ewelink.cc/t/discussion-about-zigbee2cube-and-non-zigbee-3-0-devices-compatibility/17848.md?page=7) [Next page](https://forum.ewelink.cc/t/discussion-about-zigbee2cube-and-non-zigbee-3-0-devices-compatibility/17848.md?page=9)