# Cast Chart Doesn't work

**URL:** <https://forum.ewelink.cc/t/cast-chart-doesnt-work/10065>\
**Category:** Uncategorized\
**Tags:** th, cast\
**Created:** [December 10, 2022, 11:12pm UTC](https://forum.ewelink.cc/t/cast-chart-doesnt-work/10065 "2022-12-10T23:12:11Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![sirsia](https://avatars.discourse-cdn.com/v4/letter/s/5fc32e/32.png) [@sirsia](https://forum.ewelink.cc/u/sirsia)\
**Post date:** [December 10, 2022, 11:12pm UTC](https://forum.ewelink.cc/t/cast-chart-doesnt-work/10065/1 "2022-12-10T23:12:11Z")

</div>

I have the TH16 Temperature/Humidity meter. I subscribed as an advanced user, because I am interested in the charts but in eWeLink Cast it does not allow me to check the option. It just appears gray. I already spent 2 hours looking for how to solve it, without success. I would appreciate help

---

<div class="post-metadata">

**Author:** ![Teki](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/teki/32/1161_2.png) [@Teki](https://forum.ewelink.cc/u/Teki)\
**Post date:** [December 12, 2022, 2:01am UTC](https://forum.ewelink.cc/t/cast-chart-doesnt-work/10065/2 "2022-12-12T02:01:43Z")

</div>

Hello, currently the TH10/TH16 series don’t support chart feature, these devices are special and we are exploring if we can get them to support this feature.  
For now the THR316/THR320 series and Temperature&Humidity sensors support this feature.

---

<div class="post-metadata">

**Author:** ![barry.barré](https://avatars.discourse-cdn.com/v4/letter/b/977dab/32.png) [@barry.barré](https://forum.ewelink.cc/u/barry.barr%C3%A9)\
**Post date:** [December 14, 2022, 7:45am UTC](https://forum.ewelink.cc/t/cast-chart-doesnt-work/10065/3 "2022-12-14T07:45:54Z")

</div>

It has been a struggle to get TH16 working as a switch AND temp sensor. right now I’m using a SONOFF smart switch in combination with a TH16, just to trigger my heating when the roomtemperature goes below a certain degree with possibility to switch the heater on and off manualy.  
Now I read that the TH16 does not support the chart feature. I’m not amused and think of it as a bad buy. Unfortunately

---

<div class="post-metadata">

**Author:** ![Teki](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.ewelink.cc/teki/32/1161_2.png) [@Teki](https://forum.ewelink.cc/u/Teki)\
**Post date:** [December 14, 2022, 8:01am UTC](https://forum.ewelink.cc/t/cast-chart-doesnt-work/10065/4 "2022-12-14T08:01:50Z")

</div>

Hello, about the Cast, we keep updating and are integrating devices/features one by one, the TH16 is possible to display chart but need some time 😀

---

<div class="post-metadata">

**Author:** ![sinplomo95](https://avatars.discourse-cdn.com/v4/letter/s/9fc29f/32.png) [@sinplomo95](https://forum.ewelink.cc/u/sinplomo95)\
**Post date:** [February 9, 2024, 10:56am UTC](https://forum.ewelink.cc/t/cast-chart-doesnt-work/10065/5 "2024-02-09T10:56:08Z")

</div>

> [@Teki](#):
>
> Hello, about the Cast, we keep updating and are integrating devices/features one by one, the TH16 is possible to display chart but need some time 😀

Would love to have the posibility to add NSPannel and SmartWise WiFi smart thermostat, both have a temperature sensor but it cannot be included in the Cast temperature charts 🙏