# Aqara H1 Wireless

**URL:** <https://forum.ewelink.cc/t/aqara-h1-wireless/23267>\
**Category:** eWeLink CUBE\
**Created:** [October 22, 2023, 7:20am UTC](https://forum.ewelink.cc/t/aqara-h1-wireless/23267 "2023-10-22T07:20:50Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![harman](https://avatars.discourse-cdn.com/v4/letter/h/f6c823/32.png) [@harman](https://forum.ewelink.cc/u/harman)\
**Post date:** [October 22, 2023, 7:20am UTC](https://forum.ewelink.cc/t/aqara-h1-wireless/23267/1 "2023-10-22T07:20:51Z")

</div>

Good mornig, I recently purchased several Aqara H1 switches without neutral and they all work well with the ihost. To complete the installation I wanted to install an Aqara Wireless H1.

After seeing that this wireless switch is zigbee 3.0 and compatible with ihost, on the page:

> **[Supported Zigbee Device - eWeLink](https://ewelink.cc/ewelink-cube/supported-device/zigbee/)**
>
> The foundation and the heart of your local smart home platform. Take SONOFF iHost as an example, after adding Zigbee sub-devices, you can create smart scenes locally or control devices in real-time to meet your needs.  We hope to bring you a...

I bought it and paired it with the ihost, without any problem. But it doesn’t work, I have created scenes for it as for another wireless button. And it does not execute these, it does not even record the keystrokes in the switch logs.

Is it the correct procedure?  
Does this button not work with ihost? As a matter of fact, I tried it with homeassistant and here it does work correctly.

Thank you for your cooperation.