# All-in-one sensor support for iHost/CUBE
**URL:** https://forum.ewelink.cc/t/all-in-one-sensor-support-for-ihost-cube/30645
**Category:** eWeLink CUBE
**Tags:** zigbee, cube
**Created:** [April 11, 2024, 9:04pm UTC](https://forum.ewelink.cc/t/all-in-one-sensor-support-for-ihost-cube/30645 "2024-04-11T21:04:51Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@guillaume](https://forum.ewelink.cc/u/guillaume)
#### Post date: [April 11, 2024, 9:04pm UTC](https://forum.ewelink.cc/t/all-in-one-sensor-support-for-ihost-cube/30645/1 "2024-04-11T21:04:51Z")
Hello,
I’d like to use a multi sensor like OWON PIR\_313-A (movement/temp/humidity/luminosity). Right now I paired a device but is is seen as movement detector only, no temp/humidity/luminosity. How can I improve that ?
---
### Author:  [@guillaume](https://forum.ewelink.cc/u/guillaume)
#### Post date: [April 11, 2024, 9:06pm UTC](https://forum.ewelink.cc/t/all-in-one-sensor-support-for-ihost-cube/30645/2 "2024-04-11T21:06:04Z")
> **[China ZigBee Multi-Sensor (Motion/Temp/Humi/Light) PIR313 factory and...](http://fr.owon-smart.com/zigbee-motion-sensor-with-wireless-alarm-for-smart-home-multisensor-pir313-product/)**
>
> ▶ Main Features: • ZigBee HA 1.2 Compliant • PIR motion detection • Temperature, humidity measuring • Illuminance measurement • Vibration detection • Long battery life • Low battery alerts • Anti-tamper • Sleek design ▶ Product: ...
---
### Author:  [@ward](https://forum.ewelink.cc/u/ward)
#### Post date: [April 12, 2024, 2:52am UTC](https://forum.ewelink.cc/t/all-in-one-sensor-support-for-ihost-cube/30645/3 "2024-04-12T02:52:44Z")
Hey,
Thx for the feedback!
We are preparing a new feature, allowing iHost to expose all supported entities from Zigbee devices in UI. As of now, such all-in-one sensors won’t work as expected.
---
### Author:  [@jam3](https://forum.ewelink.cc/u/jam3)
#### Post date: [April 12, 2024, 2:56am UTC](https://forum.ewelink.cc/t/all-in-one-sensor-support-for-ihost-cube/30645/4 "2024-04-12T02:56:55Z")
See the manual and observe page 4. Try swapping DIP switch 4 position and hope for the best. Note that changes made with the switch are effective only after you re-pair the sensor. **They’re not affective right away.** There’s nothing else you can do.
---
### Author:  [@guillaume](https://forum.ewelink.cc/u/guillaume)
#### Post date: [April 12, 2024, 6:09am UTC](https://forum.ewelink.cc/t/all-in-one-sensor-support-for-ihost-cube/30645/5 "2024-04-12T06:09:43Z")
> [@jam3](#):
>
> the manual and observe page 4. Try swapping DIP switch
Hello,
Which manual are you talking about ? I only see [iHost User Guides - SONOFF Official](https://sonoff.tech/ihost-user-guides/) and [https://sonoff.tech/wp-content/uploads/2023/08/说明书-iHost-V1.0.pdf](https://sonoff.tech/wp-content/uploads/2023/08/%E8%AF%B4%E6%98%8E%E4%B9%A6-iHost-V1.0.pdf) - no mention for DIP switches ?
---
### Author:  [@guillaume](https://forum.ewelink.cc/u/guillaume)
#### Post date: [April 12, 2024, 6:10am UTC](https://forum.ewelink.cc/t/all-in-one-sensor-support-for-ihost-cube/30645/6 "2024-04-12T06:10:02Z")
Nice, when is it supposed to come ? is there a way to help.test ?
---
### Author:  [@ward](https://forum.ewelink.cc/u/ward)
#### Post date: [April 12, 2024, 6:47am UTC](https://forum.ewelink.cc/t/all-in-one-sensor-support-for-ihost-cube/30645/7 "2024-04-12T06:47:43Z")
Thx for your kind offer,
We will keep you updated once we have it prepared for the pilot test 🙂
---
### Author:  [@jam3](https://forum.ewelink.cc/u/jam3)
#### Post date: [April 12, 2024, 6:57am UTC](https://forum.ewelink.cc/t/all-in-one-sensor-support-for-ihost-cube/30645/8 "2024-04-12T06:57:12Z")
> [@guillaume](#):
>
> Which manual are you talking about ?
The manual for your OWON PIR\_313-A I’m talking about. Don’t you have it? See [here](https://www.owon-smart.com/uploads/Quick-Start-Guide-PIR313-Multisensor-V0.4.pdf).
---
### Author:  [@guillaume](https://forum.ewelink.cc/u/guillaume)
#### Post date: [April 12, 2024, 4:08pm UTC](https://forum.ewelink.cc/t/all-in-one-sensor-support-for-ihost-cube/30645/9 "2024-04-12T16:08:10Z")
Ok, strangely enough I removed the batteries and saw no DIP switch… strange. So thanks for the idea but it’s a dead en unfortunatley
---
### Author:  [@jam3](https://forum.ewelink.cc/u/jam3)
#### Post date: [April 12, 2024, 4:21pm UTC](https://forum.ewelink.cc/t/all-in-one-sensor-support-for-ihost-cube/30645/10 "2024-04-12T16:21:48Z")
Take a better look. It’s very tiny 🙂
---
### Author:  [@guillaume](https://forum.ewelink.cc/u/guillaume)
#### Post date: [April 12, 2024, 6:04pm UTC](https://forum.ewelink.cc/t/all-in-one-sensor-support-for-ihost-cube/30645/11 "2024-04-12T18:04:19Z")
Well, it must be micro-tiny then :
---
### Author:  [@jam3](https://forum.ewelink.cc/u/jam3)
#### Post date: [April 12, 2024, 7:05pm UTC](https://forum.ewelink.cc/t/all-in-one-sensor-support-for-ihost-cube/30645/12 "2024-04-12T19:05:23Z")
> [@guillaume](#):
>
> must be micro-tiny
Very 😄
Your make is different then. I’m sorry.
---
### Author:  [@guillaume](https://forum.ewelink.cc/u/guillaume)
#### Post date: [April 14, 2024, 11:49am UTC](https://forum.ewelink.cc/t/all-in-one-sensor-support-for-ihost-cube/30645/13 "2024-04-14T11:49:40Z")
Actually, it seems to be more or less functional already… See the log for this sensor :
---
### Author:  [@guillaume](https://forum.ewelink.cc/u/guillaume)
#### Post date: [April 14, 2024, 11:50am UTC](https://forum.ewelink.cc/t/all-in-one-sensor-support-for-ihost-cube/30645/14 "2024-04-14T11:50:32Z")
Only the luminance part is really missing. But how do I get the iHost consider it is not only motion detector, but temp and humidity as well ? Is there a file I could update with the file browser ?
---
### Author:  [@jam3](https://forum.ewelink.cc/u/jam3)
#### Post date: [April 14, 2024, 6:28pm UTC](https://forum.ewelink.cc/t/all-in-one-sensor-support-for-ihost-cube/30645/15 "2024-04-14T18:28:35Z")
You can’t do this. There’s no way to change it by yourself.
---
### Author:  [@ward](https://forum.ewelink.cc/u/ward)
#### Post date: [April 15, 2024, 2:14am UTC](https://forum.ewelink.cc/t/all-in-one-sensor-support-for-ihost-cube/30645/16 "2024-04-15T02:14:59Z")
Hey,
It is not supported yet.
A workaround would be Node-Red, where you can use event-state to subscribe to its state changes and make a filter to split it up.
---
### Author:  [@guillaume](https://forum.ewelink.cc/u/guillaume)
#### Post date: [April 15, 2024, 11:37am UTC](https://forum.ewelink.cc/t/all-in-one-sensor-support-for-ihost-cube/30645/17 "2024-04-15T11:37:49Z")
Hey great idea ! And I could register a dual temp/humidity sensor to send back to the gui !
---
### Author:  [@jam3](https://forum.ewelink.cc/u/jam3)
#### Post date: [April 15, 2024, 3:53pm UTC](https://forum.ewelink.cc/t/all-in-one-sensor-support-for-ihost-cube/30645/18 "2024-04-15T15:53:13Z")
You can. Probably.
---
### Author:  [@guillaume](https://forum.ewelink.cc/u/guillaume)
#### Post date: [April 15, 2024, 5:24pm UTC](https://forum.ewelink.cc/t/all-in-one-sensor-support-for-ihost-cube/30645/19 "2024-04-15T17:24:52Z")
Well, no luck. The configuration of the event-state node allows to filter which state change you want (Battery/Detect/RSSI) or get All :
But even with “all”, I don’t get the events I aim (temp/humidity, not to mention luminosity) :
Only RSSI get through (and motion of course)
---
### Author:  [@guillaume](https://forum.ewelink.cc/u/guillaume)
#### Post date: [June 23, 2024, 5:08am UTC](https://forum.ewelink.cc/t/all-in-one-sensor-support-for-ihost-cube/30645/20 "2024-06-23T05:08:13Z")
Hello,
I deleted and added the device back with 2.0.0 firmware, but for now nothing seems changed :
- still detected as motion only
- all event gets through the operation log
- But only rssi/detection were reachable with node-red
I say “were”, because since I upgraded node-red to the latest version as well, I don’t get the motion events anymore, and I don’t have the ability to filter on motion detection events as well(“Detect” not being present in the list) :
Is there a possibility to rollback/fix node-red add-on please ?
Is there something I can do to improve the multi-device compatibility or is it just a matter of time again ?
[Next page](https://forum.ewelink.cc/t/all-in-one-sensor-support-for-ihost-cube/30645.md?page=2)